Filter
Top Products
CCN 99828618
OPERATOR’S MANUAL SB30X-XXX-X
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 2-18-00
REVISED: 5-27-10
(REV. G)
3" SHOCK BLOCKER®
METALLIC PULSATION DAMPENER
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to the Model Description Chart to match the pump material
options.
637330-3X for repair of the diaphragms and “O” rings (see page 4).
PUMP DATA
Models . . . . . . . . . . . . . . . . . see Model Description Chart for “-XXX-X”
Pulsation Dampener Type . . . . . . . . . . . . . Metallic
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Model Description Chart
Weight . . . . SB30X-XAX-X . . . . . . . . . . . . . . 41 lbs (18.6 kgs)
SB30X-XCX-X . . . . . . . . . . . . . . 94 lbs (42.6 kgs)
SB30X-XSX-X . . . . . . . . . . . . . . . 96 lbs (43.5 kgs)
Material Inlet / Outlet
SB30X-AXX-X . . . . . . . . . . . . . . 3 - 8 N.P.T.F. - 1
SB30X-BXX-X . . . . . . . . . . . . . . Rp 3 (3 - 11 BSP parallel)
Air Inlet (female) . . . . . . . . . . . . . . . . . . . . . . . 3/4 - 14 N.P.T.
Maximum Air Inlet Pressure . . . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Temperature Limits (diaphragm / seal material)
E.P.R. / EPDM . . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Santoprene® . . . . . . . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Maximum Fluid Volume . . . . . . . . . . . . . . . 367 in. (6.01 lit.)
Dimensional Data . . . . . . . . . . . . . . . . . . . . . . see page 7
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or
the factory if you have questions concerning availability.
MODEL DESCRIPTION CHART
SB30 X - X X X - X
Air Section Material
A - Aluminum
S - Stainless Steel
Fluid Connection
A - 3 - 8 N.P.T.F. - 1
B - Rp 3 (3 - 11 BSP, parallel)
Fluid Section Service Kit Selection
EXAMPLE: Model #SB30A-BAP-G
Fluid Section Service Kit # 637330-3G
SB30X - XXX - X
Diaphragm
637330 - 3 X
Fluid Cap Material
A - Aluminum
C - Cast Iron
S - Stainless Steel
Diaphragm Material
A - Santoprene
G - Nitrile
T - PTFE / Santoprene
V - Viton
Hardware Material
P - Carbon Steel
S - Stainless Steel
Figure 1
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com