Filter
Top Products
E2006 CCN 99778888
& (800) 276-4658 D FAX (800) 266-7016
INGERSOLL RAND COMPANY LTD
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506-0151
OPERATOR’S MANUAL 650935-X-C
RELEASED: 9-29-00
REVISED: 11-10-06
(REV. C)
2.062 SQ.” HYDRAULIC MOTOR
3.6:1 RATIO
6” STROKE
INCLUDE MANUALS: 66266-X-B Lower Pump End (pn 97999-829), 67147-B Hydraulic Motor (pn 97999-1219) &
S-632 General Information Manual (pn 97999-624)
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
650935-X43-C
CHOP-CHECK PUMP SERIES
CARBON STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637449 for repair of hydraulic motor section.
• 637074-X43-B for repair of lower pump section. Refer to the
chart on page 2 for description of -XXX options.
SPECIFICATIONS
Model Series (refer to option chart) 650935-X43-C. . . . . . . .
Type Hydraulically Operated, Chop-Check. . . . . . . . . . . . . . . . . .
Ratio 3.6:1. . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Motor 67147-B. . . . . . . . . . . . . . . . .
Motor Repair Kit 637449. . . . . . . . . . . . . . .
Motor Size 2.062 sq." (13.3 sq. cm). . . . . . . . . . . . . . . . . . .
Stroke 6" (15.2 cm). . . . . . . . . . . . . . . . . . . . . .
Hydraulic Inlet (female) 3/8 - 18 N.P.T.F. - 2. . . . . . . . . .
Hydraulic Return (female) 1/2 - 14 N.P.T.F. - 2. . . . . . . .
Lower Pump End Series 66266-X43-B. . . . . . . . . .
Lower Pump Repair Kit 637074-X43-B. . . . . . . . .
Material Inlet N/A. . . . . . . . . . . . . . . . .
Material Outlet (female) 1 - 11-1/2 N.P.T.F. - 1. . . . . . . . .
Weight 62.1 lbs (28.2 kgs). . . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range 50 - 1200 p.s.i. (3.4 - 83 bar). . .
Fluid Pressure Range 180 - 4320 p.s.i. (12.4 - 297.9 bar). . . . . .
Required H-power @ 50 c.p.m. 3.2 @ 1200 (83 bar). . . . . .
Hydraulic flow required @ 50 c.p.m. 4.9 g.p.m. (18.5 l.p.m.).
Maximum rec’d Cycles / Minute 50. . . . .
Displacement In
3
Per Cycle 6.959. . . . . . . .
Volume / Cycle 3.9 oz. (114 ml). . . . . . . . . . . . . . . . . .
Cycles Per Gallon 33.2. . . . . . . . . . . . . . .
Flow @ 50 Cycles / Minute 1.5 g.p.m. (5.7 l.p.m.). . . . . . . . .
Noise Level N/A. . . . . . . . . . . . . . . . . . . .
Maximum Temperature Limit 130_ F (54_ C). . . . . . .
PUMP DATA
Hydraulic Motor 67147-B
(see manual 67147-B)
Figure 1
Material Outlet (female)
1 -11-1/2 N.P.T.F. - 1
90_ from hydraulic inlet
Lower Pump 66266-X43-B
(see manual 66266-X-B)
Hydraulic Inlet (not shown)
3/8 - 18 N.P.T.F. - 2 (female)
Spacer Section
47-15/32"
(1206 mm)
17-3/4"
(450 mm)
33-3/32"
(841 mm)
Accessories available: 61937-1 wall bracket and 65138 floor mounting flange.
Connector (see Figure 2)
MODEL 650935-X43-C
Screw 93342-1 (3)
Washer Y79-625 (3)
Spacer Rod 93345-1 (3)
3-15/32"
(88 mm)
Hydraulic Outlet (female)
1/2 - 14 N.P.T.F. - 2
IMPORTANT
This is one of the four documents which support the pump. Re-
placement copies of these forms are available upon request.
= 650935-X-C Model Operator’s Manual (pn 97999-836)
- S-632 General Information - Industrial Piston Pumps (pn 97999-624)
- 66266-X-B Lower Pump End Operator’s Manual (pn 97999-829)
- 67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)