Hustler Turf Trimstar Hydro Walkbehind Lawn Mower User Manual


 
increments, 3.18 cm to 11.43 cm)
Main Blades Heavy-duty, heat-treated, 10B38 steel blades
36 in Deck
20.5 in x 2.50 in x .204 in LH blade
13.75 in x 2.50 in x .204 in RH blade
48 in Deck: 16.5 in x 2.50 in x .204 in
Fusion
blades feature tungsten carbon material fused to the
bottom of the blade. This material is very hard and blades stay
sharper longer necessitating sharpening less often and better
cutting quality for longer periods of time.
Blade Tip Speed 36 & 48 in Deck 18,500 fpm
Blade Drive V-belt drive to spindles. Spring tension idler pulleys
Spindles Aluminum casting with steel shafts and sealed ball
bearings
Trim Capacity (left side): 36 in Deck:0 in (0 cm)
48 in Deck: 2 in (5.08 cm)
Configurations 36” SD Deck, 15 hp
48” SD XR-7 Deck, 17 hp
Accessories
Mulch Kits Recycles clippings under deck allowing clippings to
be cut and recut, then discharged down into grass. Reduces han-
dling of clippings, improves appearance, and recycles nutrients
back to the soil
Deck-Mounted Catcher Easily-installed, side-mounted catcher
holds 3.75 bushels.
Roll-On
Striping Sulky A stand-on sulky that features a strip-
ing roller instead of tires. Produces beautiful striping results
because weight of operator improves striping performance.
Compatible with after-market sulkies and trailers
Weight Kit
Specifications subject to change without notice.
Engine Specifications
Model Kawasaki Kawasaki
Horsepower 15 17
No. of Cylinders 2 2
Displacement 26.3 cu in (431 cc) 30.1 cu in (585 cc)
Compression Ratio 8.5:1 8.5:1
Max. Torque 23.6 ft lbs @ 2400 rpm 36.2 ft lbs @ 2000 rpm
Form No. 799163 4-06
Starting Recoil
Ignition Electronic
Charging System 12-volt, 15-amp
Fuel Unleaded gasoline
Fuel Filter Replaceable, automotive-type
Air Cleaner Dual element
Cooling Air cooled. Fly-wheel fan
Governor Mechanical
Traction Drive System
Type Dual hydrostatic. Hydro-Gear IZT
Pump Drive V-belt drive from engine crankshaft
Ground Speed 0-6.0 mph (0-9.7 kph) forward and 0-2 mph
(0-3.2 kph) reverse, infinitely variable
Steering Patented, self-centering H-Bar
(Hustler Bar) Plus
Steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns are all controlled with
the easy to learn, easy to operate H-Bar Plus Steering. Now
with cruise control.
Turning Radius True zero turning radius. Turns within its own
length. Counter-rotating, independent drive wheels
Brakes Service: Hydrostatic dynamic braking
Parking: Sprocket and cog
Mower Drive Warner electromagnetic clutch.
Tires Front:
Two – 11 x 4 – 4, smooth, semi-pneumatic
Drive: 18 x 9.50 – 8, turf tread (18 x 6.50 – 8 on 36” model)
Capacities
Fuel System: 5 US gal
Dimensions
Height: 41.4 to 45.4 in (105.16 to 115.32 cm) adjustable
W/36 in Deck Length: 74 in (187.96 cm)
Overall Width: 37.7 in (95.76 cm)
w/discharge chute up
Tire-to-tire Width: 33.25 in (84.5 cm)
Weight: 550 lbs (249.48 kg)
W/48 in Deck Length: 73.5 in (186.69 cm)
Overall Width: 49.5 in (125.73 cm)
w/discharge chute up
Tire-to-tire Width: 39.5 in (100.33 cm)
Weight: 550 lbs (249.48 kg)
Safety Features
Operator presence safety-interlock system. Side discharge
deck with discharge chute
Construction Mainframe is reinforced 1/8 in welded steel
construction.
Controls Hand-operated throttle/choke, ignition switch,
mower clutch switch
Indicators Hour meter
Warranty 2-year parts and labor warranty on entire unit
3-year limited warranty on front caster fork bearings
and blade spindle bearings Lifetime warranty on leading
edge of the deck
Decks 36” and 48” XR-7 Side-Discharge Decks. Free-
floating, side-discharge mower using three blades (36”
deck uses 2 blades). Mower is suspended at the corners
by four height-adjustment pins. 48” XR-7 deck includes
FreeFlow™ triangles for improved cutting and reduced
build up under the deck, deck-mounted anti-scalp rollers
to improve flotation in rolling and uneven terrain.
Construction
36 in Deck: 7-gauge deck plate with 7-gauge doublers.
48 in Deck:11-gauge deck plate with 11-gauge doublers.
1-1/2” x 1/2” steel bar reinforced impact areas on front
and trim edges, heavily-reinforced front edge. Lifetime
warranty on leading edge of deck. Deck housing is 4
in deep to provide room for high-capacity mowing
Discharge Side
Cutting Heights Pin-type adjustment at four corners of
deck in .25 in increments from 1.25 in to 4.5 in (.1 cm
H u s t l e r T u r f E q u i p m e n t • H e s s t o n , Ka n s a s 6 7 0 6 2 • 1 - 8 0 0 - 3 9 5 - 4 7 5 7
F o r m o r e i n f o r m a t i o n : w w w . h u s t l e r t u r f . c o m
No daily lube points!
A full two-year bumper-to-bumper warranty – parts and labor!
Lifetime warranty on the
leading edge of the deck
3-years on the blade spindle bearings
3-years on front-caster fork bearings
Simple, efficient drive system – integrated,
serviceable IZT transmissions. No hoses, no leaks.
Patented H-Bar
TM
Plus
steering system – the easiest-to-learn,
easiest-to-use, walk-behind steering system. The mower
seems to glide over the lawn effortlessly! Now with cruise control!
With the addition of the Hustler Roll-On
TM
striping sulky you really will
glide over the lawn while creating beautiful striping.
Competitive price – the TrimStar Hydro is
priced lower than competitive hydrostatic,
floating-deck units for a tremendous value
in the commercial mowing market.
THE TRIMSTA R HYDRO-W AL K BEHIND
But where to begin?
They’re not easily discussed, these new TrimStar Hydro walk-
behinds, their benefits many, their advantages everywhere.
So pick any reason why… productivity, ergonomic ease
of use, quality of cut and accessibility to tight lawn
spaces, simplicity of maintenance… and let that be
your rationale for running the most innovative,
most technologically advanced walk-
Behind on the market today. The
TrimStar Hydro WalkBehind
will deliver. And we’re
now about to count
the ways.
The newly-designed, full-floating decks
offer the highest-quality cut and finished
appearance on the market. In side-discharge
or mulch, the TrimStar Hydro will produce an
immaculate lawn