Filter
Top Products
MAINTENANCE
21
1740274
HOW TO REPLACE THE SCRAPER BLADE
1. Use adjustable wrenches to remove the fasteners that
secure the scraper blade (Figure 16).
2. Install a new scraper blade and secure with the
fasteners removed in step 1.
Figure 16
Scraper Blade
HOW TO FREE THE AUGER CABLE
IMPORTANT: If the auger cable will not move when you
ENGAGE the bail, the auger cable could be frozen in-
side the conduit. DO NOT pull on the auger cable.
Instead, thaw the conduit and lubricate the auger
cable.
1. Thaw the conduit so the auger cable moves freely.
2. Work grease into the opening on the top of the conduit
where the auger cable enters.
Figure 17
Conduit