Filter
Top Products
ASSEMBLING THE MOWER
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Hold the engine stop lever in towards the handlebar and
unfold the handlebar to the operating position, before releasing. Tighten
both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
E
R
BRIG
G
S & STR
A
TT
ON
H
A
R
R
I
E
R
41
1C415A01
Handlebar
Delivery Checklist
Grassbag Attachment
415022 (0) 10/3/05 11:35 am Page 1.12