Harbor Freight Tools 94593 Chipper User Manual


 
SKU 94593 For technical questions, please call 1-800-444-3353 Page 4
Product Specific Safety Precautions
1. Always stabilize yourself on the ladder or platform before handling and
activating the Pneumatic Garden Shears. A second person may be helpful
to stabilize the tool user when he is climbing a ladder or getting on a platform.
2. Use great caution when cutting shrubs to avoid amputating fingers,
hands or arms. The blades activate under high pressure. Once the trigger is
pulled, the pneumatic function of the cuttings blades will not stop until the cut
is complete.
3. Always disconnect the air line immediately after use. Squeeze the trigger
after the air line is disconnected to release any residual air in the chamber.
4. Wear work gloves to protect your hands.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure that the parts of the Pneumatic Garden
Shears are complete. If any parts are missing or broken, please call Harbor
Freight Tools at the number on the cover of this manual.
Assembly
Air Connection
1. Attach an air hose (not supplied) to the Air Inlet (12) fitting.
2. Optionally, for easy connection or removal, attach an Air Quick-coupler (not
supplied) to the air hose and Air Inlet (12) fitting.
3. Tighten all couplings and fittings.
Air Inlet (12)