Grizzly H8100 Log Splitter User Manual


 
Operation
1. 


2.         



Note: Make sure the wedge release pins are
firmly seated in the post holes before continu-
ing.
4. 
5.        
        


6.       


7. 

8. 


Storage
         
       

Maintenance



To add oil to the hydraulic pump:
Note: Refer to the Parts Breakdown to iden-
tify parts named below.
1.      

2.      
      

3.      


4. 


5. 

1. Read and understand this entire instruc-
tion sheet before using this log splitter.
2. Always wear ANSI approved safety
glasses when using this log splitter to
avoid damage to eyes from flying wood
pieces.
3. Never place your hands or other body
parts on or near the log, wedge, hydrau-
lic ram, or splitter workbench when
splitting the log.
4. Do not use this log splitter for any other
purpose other than splitting logs. Do
not use this log splitter beyond its 8 ton
capacity.
5. Never leave the log under pressure.
6. Keep the area around log splitter clear
of bystanders to prevent injury from
ejected wood pieces.
7. Always clear away wood pieces from the
log splitter and the area around it before
starting on another log.
If you need help with this procedure, call our Tech
Support at: (570) 546-9663.