Filter
Top Products
3-6 489 Generator Management Relay GE Multilin
3.2 SOFTWARE INTERFACE 3 USER INTERFACES
3
b) INSTALLING/UPGRADING 489PC
Installation/upgrade of the 489PC software is accomplished as follows:
1. Ensure that Windows is running on the local PC
2. Insert the GE Multilin Products CD into your computer or point your web browser to the GE Multilin website at
www.GEindustrial.com/multilin
. With Windows95/98, the Products CD will launch the welcome screen (see figure
below) automatically; with Windows 3.1, open the Products CD by opening the index.htm file in the CD root directory
with a web browser.
The Products CD is essentially a “snapshot” of the GE Multilin website at the date printed on the CD. As such, the proce-
dures for installation from the CD or the website are identical; however, to ensure that the newest version of 489PC is
installed, installation from the web is preferred.
Figure 3–3: GE MULTILIN WELCOME SCREEN
3. Click the Index by Product Name item from the Products menu of the left side of the page then select 489 Generator
Management Relay from the product list to open the 489 product page.
4. Click the Software item from the Resources list to open the 489 software page.
5. The latest version of 489PC will be shown (see previous page). Select the Download 489PC Software item to down-
load the installation program. Run the installation program and follow the prompts to install the 489PC software. When
complete, a new GE Multilin group window will appear containing the 489PC icon.
Specific resources can be
accessed from this menu
Select from the
Products list to proceed
directlytothe489
Generator Management
Relay Product Page
489
Technical publications
and support for the 489
can be accessed through
the menuSupport