Filter
Top Products
11
GB
Fitting the guide handle:
Working position
basic settings:
1
2
3. Function
The Telescopic Hedge Trimmer has three basic settings, which
are marked on the blade head
1
and the handle
2
as positions
!
,
"
and
§
.
4. Assembly
1. Push the guide handle
3
onto the main handle
4
in such a
way, that the plunger
a
of the guide handle
3
is on the right
side.
2. Secure the guide handle
3
to the main handle
4
with
the two screws
5
.
5. Operation
DANGER ! Risk of physical injury!
A
V Always disconnect the Hedge Trimmer from the
power supply and slide the trimmer blade sheath
6
over the trimmer blade before making any
adjustments.
V Never take hold of the trimmer blade when
adjusting the working position!
V Always ensure that the angle button
8
, the axial
button
9
and the telescopic button
0
snap into
place correctly.
3
4
a
5
6
Side trimming
(position
!
) of
hedges, at a distance
from the standing
position, (e.g.
reaching over
flower beds).
Low trimming
(position
"
) of low
hedges (e.g. ground
cover) while standing
upright.
High trimming
(position
§
) of
hedges up to
approx. 2.5 m from
the ground without
using a ladder or
scaffolding.