Filter
Top Products
6
CS-400
EM I S S I O N DA T A
PACKING LIST
The ECHO product you purchased has been fac-
tory pre-assembled for your convenience. Due to
packaging restrictions, guide bar and saw chain
installation and other assembly may be necessary.
After opening the carton, check for damage. Im-
mediately notify your retailer or ECHO dealer of
damaged or missing parts. Use the packing list to
check for missing parts.
Warranty registration
card
T-wrench
ECHO Power Blend X™
2-stroke oil sample
Instruction manual Safety manual
ECHO chain saw
Saw chain
Guide bar
Kick Guard®
An Emission Control Label is located on the en-
gine. (This is an EXAMPLE ONLY, information on
label varies by engine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance
procedures are followed as listed in the Maintenance Section of this manual.
INSTRUCTION MANUAL
CHAIN SAW
CS-400
WARNING
Read the instructions carefully and follow the rules for safe
operation.
Failure to do so could result in serious injury.
X750-009 68 1
X750 325-060 1
ECHO, INCORPORATED
400 Oakwood Road, Lake Zurich, Illinois 60047-1564
Phone : 847-540-8400
Printed in Japan 0802MGrh 0098 ES
E M I S S I O N C O N T R O L (E x h A U S T & E v A P O R A T I v E )
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC
(Engine Modication and 3-way Catalyst) and for the fuel
tank the Control System is EVAP (Evaporative Emissions)
or N (for nylon tank). Evaporative emission may be appli-
cable to California models only.