Echo CS-400 Chainsaw User Manual


 
14
CS-400
Mixing Instructions
1. Fill an approved fuel container with half of the required
amount of gasoline.
2. Add the proper amount of 2-stroke oil to gasoline.
3. Close container and shake to mix oil with gasoline.
4. Add remaining gasoline, close fuel container, and remix.
IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emis-
sions. Some states may require the use of automatic
fuel shut-off containers to reduce fuel spillage.
After use
• DO NOT store a unit with fuel in its tank. Leaks can occur.
Return unused fuel to an approved fuel storage container.
Storage - Fuel storage laws vary by locality. Contact your lo-
cal government for the laws affecting your area. As a precau-
tion, store fuel in an approved, airtight container. Store in a
well-ventilated, unoccupied building, away from sparks and
ames.
Fuel Mix Chart
50:1
IMPORTANT
Stored fuel ages. Do not mix more fuel than
you expect to use in thirty (30) days, ninety
(90) days when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS
shake fuel container thoroughly before each
use.
Oil tank cap
Fuel tank cap
Cap indication
Fuel/oil tanks are indicated by the following
illustrations.
CHAIN LUBRICANT
Proper lubrication of the chain while in operation
reduces friction between the chain and the guide
bar to a minimum and assures a longer service life.
• Use bar and chain oil of high quality for this pur-
pose.
• Do not use used or reclaimed oil to avoid various
oiler problems.
Use ECHO bar and chain oil.
When ECHO bar and chain oil is not available:
Use motor oil, etc.
Use bar and chain oil of the following grades:
SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting resin-
ous trees.
When refueling, also rell chain oil.