Craftsman 580.76225 Pressure Washer User Manual


 
Placeassembled spray gun on holder.
Cut tie wrap from high pressure hose. Connect
high pressure hose to gun witheither two
adjustable wrenchs or one 11/16" and one 7/8"
wrench.
Remove plastic cap and connect high pressure
hose to pump.
HIGH PRESSURE
OUTLET
Connect nozzle extension to spray gun.
CHECKLIST
Before you operate your new high pressure washer,
to be sure you receive the best performance and sat-
isfaction from this quality product, please review the
following checklist:
All assembly instructions have been completed.
The high pressure hose connections to the spray
gun and to the pump are tight and secure.
A
CAUTION: Any attempt to crank or
start the engine before it has been
properly serviced with the recommend-
ed oil may result in an engine failure.
See Page 9 for instructions on adding
oil and proper oil specifications.
While learninghow to use your high pressure
washer, pay extra attention to the following important
items:
Engine oil is at proper level
Besure gas tankis filled properlywith clean, -
fresh, unleaded gasoline.
Become familiar with all controls- their location
and funcUon. Operate those controlsbefore start-
ingthe engine.