Filter
Top Products
RULES FOR SAFE OPERATION
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and inter
national symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or caution.
May be used in conjunction with other
symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING: Read the
Operator’s Manual(s) and follow all
warnings and safety instructions.
Failure to do so can result in serious
injury to the operator and/or
bystanders.
•
WEAR EYE, HEARING AND
HARDHAT PROTECTION
WARNING: Thrown objects
and loud noise can cause severe eye
injury and hearing loss. Wear eye pro-
tection meeting ANSI
Z87.1-1989 standards and ear protec-
tion when operating this unit.
Wear a hard hat.
Use a full face shield
when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the
proper type of oil.
SYMBOL MEANING
• ON/OFF CONTROL
ON / START / RUN
• ON/OFF CONTROL
OFF OR STOP
• GUIDE BAR
WARNING: Contact of the
guide bar tip with any object should
be avoided. Tip contact may cause
the guide bar to move suddenly
upward and backward, which may
cause serious injury.
• USE BOTH HANDS
Always use both hands while operat-
ing the chain saw. Never use only one
hand to operate the saw.
• RED CHOKE LEVER POSITIONS
1 FULL
Choke Position
2 PARTIAL Choke Position
3 RUN Position
1
2
3
6
• Make sure that the area in which you are cutting is free
from obstructions. Do not let the nose of the guide bar
contact a log, branch, fence, or any other obstruction
that could be hit while you ar
e operating the saw.
•
Always cut with the engine running at full speed. Fully
squeeze the throttle trigger and maintain a steady cut-
ting speed.
• Use only the correct original equipment manufacturer
replacement bars, chains and other parts and acces-
sories. These are available from a Sears or other quali-
fied service dealer. Use of any unauthorized parts or
accessories could lead to serious injury to the user, or
damage to the unit, and will void your warranty.
• Follow the manufacturer’s sharpening and maintenance
instructions for the saw chain.
• Use only the replacement guide bars and low kickback
chains specified for your saw to avoid injury.
• Watch for shifting logs or other forces that could pinch
or fall into chain.
• Always have saw at full speed when entering a previous
cut. Always use caution when entering a previous cut.
• Do not start a cut using the tip of the saw.
OTHER SAFETY PRECAUTIONS
• Do not operate a chain saw with one hand! Serious
injury to the operator, helpers, bystanders, or any com-
bination of these persons may result from one-handed
operation. A chain saw is intended for two-handed use.
• Do not operate a chain saw if you are fatigued.
• Use safety footwear; snug-fitting clothing; protective
gloves; and eye, hearing, and head protection devices.
• Do not allow other persons to be near the chain saw
when starting or cutting with the chain saw. Keep
bystanders and animals out of the work area.
• Do not remove, damage or de-activate any of the safety
devices. Never use a damaged, modified, or improperly
repaired or assembled chain saw. Check their proper
operation regularly. Only use bars and chains of the
length indicated in the table herein.
• Never carry out operations or repairs on your own that
are other than routine maintenance as listed in this
manual.
•
Use caution when felling a tree. Make sure you have
planned an escape path when felling, and keep all
bystanders away.
•
Be aler
t; stop the machine if anyone enters the cutting
area, which is usually 3 to 4 feet around the operator.
• Use caution when working in a crew to avoid injury to a
fellow worker who may enter the cutting ar
ea.
•
Only loan your saw to experienced users who ar
e com-
pletely familiar with saw operation and cor
r
ect use. Give
other users this manual, which they should r
ead befor
e
using the saw.
• Shut off the engine before setting down the saw. Do not
leave the engine running unattended.
• Never store the unit, with fuel in the tank, inside a build-
ing wher
e fumes may reach an open flame or spark.
• Allow the engine to cool before storing or transporting
the chain saw over long distances. For example, let the
engine cool before placing the chain saw in an automo-
bile. Also, be sure to secure the unit while transporting.
• Store the unit in a dry area, locked up, located up high
and located out of the reach of children to prevent
unauthorized use or damage.
• Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use.
• Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them the instructions.
• Do not use the unit in the rain, in a storm or in inclement
weather.
FUEL SAFETY
• Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Always stop the engine and allow it to cool before
filling the fuel tank. Never remove the cap of the fuel
tank, or add fuel, when the engine is hot. Never operate
the unit without the fuel cap securely in place. Loosen
the fuel tank cap slowly to relieve any pressure in the
tank.
• Add fuel in a clean, well-ventilated outdoor area where
there are no sparks or flames. Slowly remove the fuel
cap only after stopping engine. Do not smoke while fuel-
ing or mixing fuel. Wipe up any spilled fuel from the unit
immediately.
•
Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.
• Move the unit at least 30 feet (9.1 m) from the fueling
sour
ce and site befor
e starting the engine. Do not
smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.
SAVE THESE INSTRUC-
TIONS
RULES FOR SAFE OPERATION
Gasoline is highly
flammable, and its
vapors can explode if ignited. Take the follow-
ing precautions:
WARNING:
5