Filter
Top Products
184 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
1
...
Cast aluminum alloy shoe base with aluminum alloy bolt
covers or base cover dependent upon base type.
2
...
Flush reinforced 2 3/8" x 4 1/2" for 4" shafts. Hand hole
assembly with internal reinforcing frame. 3" x 5" for 5" and
6" shafts, 4" x 6" for 7", 8", 10" shafts. Ground lug located
opposite hand hole opening drilled & tapped for 3/8"
16NC-2 grounding screw.
3
...
Tapered aluminum lighting shaft with polished finish.
4
...
Drilled or Tenon (specify).
5
...
Anchor bolt per ASTM A576 with (1) nut, (1) flat washer,
and (2) shims. Nuts, washers and threaded portion of bolt
are hot dip galvanized.
SPECIFICATION FEATURES
FOUR BOLT ANCHORAGE [See ordering information]
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
FINISH COLORS [See ordering information. Other finish colors available.]
B=Clear Anodized
C=Dark Bronze Anodized
D=Black Anodized
E=Medium Bronze Anodized
F=Dark Bronze Powder Coat
V=Grey Powder Coat
W=White Powder Coat
X=None (natural aluminum)
Y=Black Powder Coat
10'—40' MOUNTING HEIGHT
RTA ROUND TAPERED ALUMINUM
POLES
MH
(mounting height)
Base View
18"
handhole
1
2
3
4
AB
BP
BC
H
D
5
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.