Conair Bath Spa Hot Tub User Manual


 
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following: Read all instructions before using this appliance.
DANGER– To reduce the risk of electric shock:
1) Always unplug this appliance from the electrical outlet immediately after charging and before using
or cleaning.
2) Do not place or store power pack where it can fall or be pulled into a tub or sink.
Do not fully immerse in or drop into water or other liquid. Store in dry place.
WARNING– To reduce the risk of burns, fire, electric shock, or injury to persons:
1) An appliance should never be left unattended when plugged in. Unplug from outlet
when not in use, and before putting on or taking off parts.
2) Do not operate under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.
3) Close supervision is necessary when this appliance is used by, on, or near
children, invalids, or disabled persons.
4) Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by Conair.
5) Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it
has been dropped or damaged, or left in water for an extended period of time. Return the appliance
to a Conair Service Center for examination and repair.
6) Do not carry this appliance by supply cord or use cord as a handle.
7) Keep the cord away from heated surfaces.
8) never operate the appliance with the openings blocked. Keep the inlet openings free of lint,
hair, and other particles.
9) Never drop or insert any object into any opening.
10) Do not use outdoors.
11) Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-
tered.
12) To disconnect, turn all controls to the "off" position, then remove transformer plug from outlet.
13) Do not use if you have sensitive skin areas or poor circulation. Use by unattended children or
incapacitated persons may be dangerous.
14) Disconnect power when not charging your bath spa.
15) Never use while sleeping or drowsy.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
OPERATING INSTRUCTIONS
This charger has a polarized plug (one blade is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety fea-
ture.
CAUTIONS
• This unit should not be used in the following cases unless directed by physician: Tuberculosis,
benign and malignant tumors, hemorrhages, inflammations of the skin, phlebitis and thrombosis,
open and fresh wounds, bruises, broken skin or varicose veins, or undetermined calf pain.
• Consult your physician if you have any therapeutic questions regarding spa use.
• Do not use on any unexplained pain before consulting your physician.
• Discontinue use of unit if pain increases or swelling occurs after application.
• Do not use on any part of the body that is anesthetized.
• Do not use on any part of the body where recent surgery has been performed.
HOW TO CHARGE THE BATH SPA
Note: your bath spa is shipped with the batteries partially charged. Before initial use, charge the bath
spa batteries for 2-3 hours.
After the initial charge, your bath spa will require about one hour to fully charge. When bath spa is
fully charged, the charge indicator will no longer be illuminated.
TO CHARGE
1. Unit should be clean and dry. Turn switch to the off position.
2. Place bath spa on a flat, dry surface away from water.
3. Raise the folding arm and lift up the rubber seal to expose charging jack.
4. Connect the charge adapter plug to the charging jack.
5. Plug charging transformer power pack into a 120V/60h/z standard electrical outlet.
6. The charge indicator (beneath mood light lens) will illuminate to show that the unit is properly
charging. When bath spa is fully charged, the charge indicator will no longer be illuminated.
7. After unit has charged (for at least 1 hour), disconnect charge transformer power pack from electri-
cal outlet and then disconnect charge jack from unit. Reseat rubber seal by pressing rubber seal
firmly into the charge jack opening.
8. To secure unit to bath tub, follow How To Use instructions.
DO NOT ATTEMPT TO CHARGE UNIT IN THE BATH TUB. DO NOT ATTEMPT TO USE UNIT
WHILE CHARGE ADAPTER IS CONNECTED TO THE UNIT.
IT IS IMPOSSIBLE TO OVERCHARGE THE BATTERY PACK. The battery pack can be charged
many times, but if your bath spa battery pack no longer accepts a charge, it may be necessary to
replace the battery pack. To replace the battery pack, your bath spa must be returned to an author-
ized Conair service center. There are no user serviceable parts inside your bath spa. Do not attempt
to disassemble this product. Opening or removing internal parts from your bath spa will void your
warranty and may expose you to voltage or other risks. Incorrect reassembling can cause electric
shock when the appliance is subsequently used.
IMPORTANT: In order to get maximum life from the bath spa battery pack, be sure to charge the bath
spa for 2-3 hours before initial use. Make sure the charge adapter is properly connected and charge
indicator is lit.
IMPORTANT: DO NOT dispose of the unit into household garbage. Your bath spa
contains a nickel cadmium (Ni-Cd) battery pack. Do not open or mutilate the battery
pack. Released electrolyte is corrosive and may cause damage to the eyes or skin.
It may be toxic if swallowed. For information on recycling or proper disposal, consult
your local solid waste collection or disposal organization.
A depleted battery that is ready to be discarded may appear to be no longer useful, but can still con-
tain a residual charge. Certain precautions must be taken to prevent batteries from short-circuiting.
• DO NOT dispose of battery pack in a fire; the cells may explode.
• DO NOT attempt to open or mutilate battery pack.
HOW TO USE
1) Attach unit securely onto tub (see how to attach bath spa to tub).
2) Fill bathtub with water.
3) Adjust height of motor assembly so that outlet nozzles are beneath
water. This can be done by moving the motor assembly up and down
vertically; the housing employs detents which will hold the motor assem-
bly at the desired height.
4) Point the water output nozzles downwards.
5) Adjust the bubble control switch on top of the unit to either "Jet Stream" or
"Bubbles" (see Fig. 1).
6) Turn the knob on the top of the bath spa to "on".
7) Turn the knob to "on/light" and the mood light will illuminate (See fig. 2).
8) Adjust the water output nozzles to create customized waterflow in your bath-
tub. The nozzles can be rotated to customize the direction of the water flow.
9) After use, turn the know to the "off" position, drain water from tub, then remove bath spa.
10) Rotate your bath spa gently over the bathtub to remove excess water, and dry with a soft cloth
before storage.
FEATURES
1) Cordless/Chargeable design
2) Quick charge - charges in one hour
3) Dual multidirectional water jets
4) Telescopic housing
5) Jet stream or bubble option
6) Mood light
7) Removable filter
8) Compact convenience
9) Charge light indicator
CAUTION: IF BATH SPA FALLS AND BECOMES COMPLETELY
IMMERSED IN WATER IN TUB, DO NOT PANIC. THE BATH SPA
HAS BEEN DESIGNED TO WITHSTAND SUBMERSION. BEFORE
CHARGING ALWAYS REMOVE UNIT FROM BATHTUB. PRESS
OFF BUTTON, DRAIN WATER FROM UNIT AND STORE IN A DRY
PLACE FOR AT LEAST 24 HOURS BEFORE CHARGING.
IMPORTANT
Keep hair, fingers, skin and loose clothing or articles away from suction opening located on sides of
unit while bath spa is in operation. Otherwise, personal injury may result. Use of shower cap is rec-
ommended for persons with long hair. Discontinue use of any oils added to bath water that may
affect performance of unit.
USER MAINTENANCE INSTRUCTIONS
You may experience some water spray if the unit shifts during operation. Do not overfill your tub. For
best results, get into your tub before filling (note: too much water can cause overflow).
The body benefits dual jet bath spa cordless can help you relax, relieve tension, and sooth sore mus-
cles. Consult your physician or physical therapist for recommendations regarding bath spa use,
including water temperature, duration, and frequency.
CARE AND MAINTENANCE
1) Keep your unit clean and clear of obstruction. Check the outflow control and water intake periodi-
cally to make sure they are free of obstruction, hair, lint, and other particles that could block air or
water flow. Clean inlet filters by rotating off sides of the bath spa. Clean by rinsing in a reverse water
flow in a sink or tub. Reinsert on bath spa by using the provided alignment marks.
2) Store your bath spa in a cool, dry place. Loosely coil charge cord and lay flat to store. Do not
wrap cord around bath spa.
Bubble/Water
Jet control
switch on side
Manual direction
dual water jets
Mood light
Adjustable
motor height
Suction cups
for bathtub wall
Off, On and On/Light
Adjustable
suction cup
Rubber Seal and
Charging Jack
Foldable arm for
easy storage
Charge Light Indicator
Removable
Filter
Filter Alignment Tabs
Transformer Power Pack
Built-in
Charging
Stand
6’ cord to spa
(Fig. 2)
Jet Stream Bubbles
(Fig. 1)