MODEL 2000008349
Fig. 5
Fig. 6
Fig. 4
Fig. 2
Fig. 3
Fig. 3A
Fig. 1
STITCH LINE
SCREENHOUSE SETUP INSTRUCTIONS
Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your screenhouse.
WARNING: Keep clear of overhead power lines.
• Do not set up your screenhouse under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of
screenhouse into the wind.
• Do not drop screenhouse.
• Do not bounce screenhouse bag on its end to remove
screenhouse, as these actions may damage the frame.
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
• Under no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the
screenhouse frame.
(continued on other side)
Extend the Screenhouse
Frame
Raise the Screenhouse
• Stand the screenhouse upright with the hub assembly at
the top. (Fig. 1)
• Unfold the arms of the screenhouse downward until they
lay flat on the ground. (Fig. 2)
• Fully extend the arms of the screenhouse away from the
center hub till the telescoping pole sections are locked in
place. (Fig. 3 and Fig. 3A)
• Extend each of the telescoping leg poles until they snap
into place. The screenhouse will raise as the leg poles are
extended. (Fig. 4)
1
2
Stake the Screenhouse
• Secure screenhouse by driving stakes through the
webbing loops sewn to the screenhouse base.
(Fig. 5 and Fig. 6 )
• Keep the floor taut.
Stake
Webbing Loop
Lock Button
3
Description Description
Repair Kit
Repair Kit
Plastic Clip 16 mm
Plastic Clip 20 mm
Fabric Repair Kit
Plastic Corner Joint
Fabric Joint Cover
5010000845
5010000846
5010000852
5010000853
5010000855