Filter
Top Products
Page 31For technical questions, please call 1-800-444-3353.SKU 67561
Owner’s Warranty Responsibilities
As the engine owner, you are responsible for the performance •
of the required maintenance listed in your Owner’s Manual.
HFT recommends that you retain all receipts covering
maintenance on your engine, but HFT cannot deny warranty
solely for the lack of receipts or for your failure to ensure the
performance of all scheduled maintenance.
As the engine owner, you should, however, be aware that •
HFT may deny you warranty coverage if your engine or a part
has failed due to abuse, neglect, improper maintenance, or
unapproved modications.
You are responsible for shipping your engine to a HFT •
warranty station as soon as a problem exists. Contact the
HFT Customer Service department at the number below to
make shipping arrangements. The warranty repairs should
be completed in a reasonable amount of time, not to exceed
30 days.
If you have any questions regarding your warranty rights
and responsibilities, you should contact the Harbor Freight Tools
Customer Service Department at 1-800-444-3353.
Harbor Freight Tools Emission Control Defects
Warranty Provisions
Length of Coverage1.
HFT warrants to a rst retail purchaser and each subsequent
purchaser that the engine is free from defects in materials
and workmanship that cause the failure of warranted parts
for a period of two (2) years after the date of delivery to the
rst retail purchaser.
No Charge Repair or Replacement2.
Repair or replacement of any warranted part will be performed
at no charge to the owner if the work is performed through a
warranty station authorized by HFT. For emissions warranty
service, contact the HFT Customer Service Department at
1-800-444-3353.
Consequential Damages Coverage3.
Coverage under this warranty shall also extend to the failure
of any engine components caused by the failure of any
warranted part while it is still covered under this warranty.
Coverage Exclusions4.
Warranty claims shall be filed in accordance with the
provisions of the HFT warranty policy explained in the box
at the top of the previous page. HFT shall not be liable for
any loss of use of the engine, for any alternative usage,
for any damage to goods, loss of time, or inconvenience.
Warranty coverage shall also be excluded for any part which
fails, malfunctions, or is damaged due to failure to follow
the maintenance and operating instructions set forth in the
Owner’s Manual including, but not limited to:
Use of parts which are not authorized by HFTa)
Improper installation, adjustment or repair of the engine b)
or of any warranted part unless performed by an
authorized warranty center
Failure to follow recommendations on fuel use contained c)
in the Owner’s Manual
Improper or inadequate maintenance of any warranted d)
parts
Repairs performed outside of the authorized warranty e)
service dealers
Alterations by changing, adding to or removing parts f)
from the engine.
Service and Maintenance5.
Component parts which are not scheduled for replacement
as required maintenance or are scheduled only for regular
inspection to the effect of “repair or replace as necessary”
are warranted for the warranty period. Any warranted part
which is scheduled for replacement as required maintenance
is warranted for the period of time up to the rst scheduled
replacement point for that part. Any replacement part,
provided it is equivalent in durability and performance, may
be used in performance of maintenance or repairs. The
owner is responsible for commissioning a qualied technician/
mechanic to perform all required maintenance, as outlined
in the Inspection, Cleaning, and Maintenance section in this
manual.
Warranted Parts6.
Fuel Metering System1)
Carburetor and its internal parts.i)
Fuel pump (if so equipped).ii)
Cold start enrichment system.iii)
Air Induction System2)
Intake pipe/manifold.i)
Air cleaner.ii)
Ignition System3)
Spark plug.i)
Magneto ignition system.ii)
Catalyst System (if so equipped)4)
Exhaust pipe stud.i)
Mufer.ii)
Catalytic converter (if so equipped).iii)
Miscellaneous Items Used in Above Systems5)
Vacuum, temperature and time sensitive valves i)
and switches.
Hoses, belts, connectors, and assemblies.ii)