Filter
Top Products
6
BLADE HOLDER, MEDALLION AND BLADE ASSEMBLY
Step 6. Align the medallion over the bracket, with the set
screw towards the edges of the blade and place the medallion
over the wider end of the bracket. When it feels engaged, push
on it until the other end snaps in place.
Step 7. Using the allen wrench, tighten the set screw by
hand until snug.
Step 8. Repeat step 5 through 7 until all 3 blade assemblies
are complete.
Step 9. Remove the motor sheild from the top of the motor,
note the caution message and read the instruction carefully.
FAN
BODY
Note: Write down the
Serial Number and
the model number for
future reference.
MOTOR SHEILD