Filter
Top Products
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 24
10
1/2
ft 10
1/2
ft
2
1/2
inch diameter 2
1/2
inch diameter
N/A 7 ft 10 inches
(Offset Models Only)
(width x length) 11 ft 1 inch x 9 ft 10 inches (Lift) 11 ft 1 inch x 13 ft 5 inches (Pull)
10 ft 11 inches 10 ft 11 inches
3 Point Category II & III Standard and 3 Point Category II & III Semi-Mount
Quick Hitch, Cat. II & III Semi-Mount and Pull Type (self leveling)
and Center Pull (self leveling)
2 to 13 inches 2 to 13 inches
10 gauge 10 gauge
1/4
x 10 inches
1/4
x 10 inches
60 PTO (Lift), 50 PTO (Pull) 55 PTO (Semi-Mount), 50 PTO (Pull)
ASAE Cat. 5 (540 RPM - Lift, Pull and ASAE Cat. 5 (540 RPM - Pull and Semi-Mount)
Semi-Mount), ASAE Cat. 4 (1000 RPM Pull)
ASAE Cat. 5 Rubber Element ASAE Cat. 5 Rubber Element
(3) 205 Center, 190 Outboard (2) 205 Main, 190 Outboard
540/1000 RPM 540 RPM
4 Plate PTO Slip Clutch 4 Plate PTO Slip Clutch
Manual or hydraulic Manual or hydraulic
Round Round
1/2
x 4 inches - Uplift
1/2
x 4 inches - Uplift
16,881 FPM/540 RPM; 17,400/1000 RPM 16,881 FPM/540 RPM; 17,400/1000 RPM
Laminated, Pneumatic, Aircraft Laminated, Pneumatic, Aircraft
Rubber Cushioned, Choice of Single or Dual Axles for Pull Models
Front Belting, Rear Band, Optional Chains Front Belting, Rear Band, Optional Chains
Standard for Pull Models Standard for Pull Models
(Pull with Single Axle) 2741 lbs 2624 lbs
Chain Shielding, Third Tailwheel for Lift or Semi-Mount Models
1 year limited warranty with a 5 year gearbox limited warranty
• High blade tip speeds • Deep sidebands