Bush Hog 2010 Series Brush Cutter User Manual


  Open as PDF
of 1
 










SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 20


 9 ft 9 inches

2 inches
 (width x length) 10 ft 3 inches x 9 ft 4 inches (Lift), 10 ft 3 inches x 13 ft (Pull)

3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount Cat. II & III

2 to 12 inches
 11 gauge

7 gauge x 10 inches

40 PTO (Pull), 60 PTO (Lift)
 ASAE Category 4
 Rubber Element
 120 Main and 90 Outboard
 540/1000 RPM
 4 Plate PTO Slip Clutch
 Choice of Manual Height Bundle or Hydraulic Cylinder
 Round Pans

1/2
x 4 inches - Corner Uplift

15,778 FPM/540 RPM; 15,708 FPM/1000 RPM

Laminated Tire on Lift and Semi-Mount Models, Laminted Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tires on Pull Type Only
 Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
 Standard Front Belting and Rear Bands (Chains Optional)

Standard for Pull Models
 1922 lbs (Lift), 2177 lbs (Pull), 1929 lbs (Semi-Mount)

Single Row Chain Deflectors for Front and Rear
 1 year limited warranty with a 5 year gearbox limited warranty
 •Rear Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields