Commercial Snowblower
SNOWBLOWERS
This manual is for both Commercial Hydraulic Snowblowers and Commercial PTO
Drive Snowblowers. The hydraulic models come in 60”, 66”, 74” and 84” widths. The
PTO drive model is only available in an 84” width. Hydraulic models come with four
different motor series. Hydraulic output on the equipment running the Snowblower must
match the requirement for each motor series for the Snowblower to work. The hitch is a
skid steer fixed type of quick hitch. The PTO drive model runs at 540 rpm. It is
supplied with category 2 hitch pins. There is a shear bolt on the auger and two on the
PTO
shaft to protect the machine from damage if a large object is picked up. All
Snowblowers come with a hydraulic chute control as standard.
Hydraulic Drive
PTO Drive
3