Filter
Top Products
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Exhaust your cooktop without the use of an
overhead hood. Compact design is installed directly
behind cooktop.
FEATURES
HOUSING:
•
Rugged steel construction
•
Silver paint and/or glavanized finish
•
Space-saving - can be used with most cooktops on the
market
•
30", 36", or 48" widths - Fits standard-size cabinets
•
For indoor use only
BLOWER:
•
Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower
wheel for quiet, efficient performance
•
Permanently lubricated, thermally-protected motor
•
Neoprene, resilient anti-vibration mounts
•
Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
•
Uses standard 3-1/4" x 10" duct connector
•
3-position discharge - scroll box moveable to adjust to
floor joists
CHIMNEY ASSEMBLY:
•
Brushed stainless steel cover - just press button to turn
unit "ON"
•
Chimney rises 9½" when activated - ideal for large pots
and pans
•
Stylish, stainless steel filters with aluminum mesh - easy
to remove and dishwasher-safe
•
Stainless steel chimney front and back - makes cleanup
quick and easy
•
Flush-mounted, infinite rotary speed blower control
•
Heat Sentry
TM
adjusts speed of blower to HIGH in case
of excess heat
•
Conveniently located button - press to lower air vent and
turn unit "OFF"
•
OPTIONAL Remote Control (Model RMDDRBK) activates
downdraft from alternate location
TYPICAL SPECIFICATION
Downdraft blower system shall be Rangemaster
®
Model
RMDD3004 (RMDD3604) (RMDD4804).
Unit shall be for indoor use only.
Unit to have steel housing with silver paint or galvanized
finish. Air vent to rise at least 9½" and have a stainless steel
front and back for ease of cleaning.
Filters to be stainless steel with aluminum mesh, easy to
remove and dishwasher-safe.
Blower will connect directly to 3¼" x 10" rectangular duct
(6" round duct using a transition). Blower discharge to be
convertible to accommodate ductwork from LEFT, RIGHT,
or BELOW and have 7½" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease
resistant anti-vibration mounts, be removable, and lifetime
lubricated.
Unit to include Heat Sentry
TM
, to adjust blower speed to HIGH
in case of excess heat and must accept an optional remote
control activation button.
Downdraft system shall operate on 120 VAC and be able to
be plugged into a standard grounded outlet. It will have an
infinite speed blower control.
Air delivery shall be no less than 500 CFM. Air delivery rat-
ing shall be certified by HVI. Downdraft blower system to be
U.L. listed.
SPECIFICATIONS
VOLTS HZ AMPS CFM DUCT
120 60 4.0 500 3-1/4" x 10"
MODELS RMDD3004, RMDD3604,
RMDD4804
DOWNDRAFT
21L 99043189E
HVI2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they
are available to consumers. Product performance is rated
at 0.1 in. static pressure, based on tests conducted in
a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada, Inc. Mississauga, Ontario www.broan.ca 877-896-1119