Filter
Top Products
34
www.SnapperPro.com
Figure 27. Deck Lift Linkage Pivots
Figure 26. Control Handle Pivots & Seat Plate Pivots
Figure 24. Deck Lubrication
Figure 29. Suspension Pivots
Figure 25. Pump Drive Idler Arm
Figure 28. PTO Drive Idler Arm
Lubricating the Drive Shaft
Maintenance Interval: Every 250 hours.
1. Position the drive shaft so that the plug (A, Figure
30) can be accessed from beneath the machine
through the hole in the engine cradle.
2. Remove the plug and install a 1/4-28 grease
fitting.
3. Grease the drive shaft.
4. Remove the 1/4-28 grease fitting and reinstall the
plug.
Lubricating the Front Casters
Maintenance Interval: Annually.
1. Remove the 1/4-28 bolt (A, Figure 31) screwed
into the caster and install a 1/4-28 grease fitting.
2.
Grease the front caster
3. Remove the 1/4-28 grease fitting and reinstall the
1/4-28 bolt
4. Repeat the process for the other side of the
machine.
Regular Maintenance
Not for
Reproduction