Briggs & Stratton RIDER 13 BIO Lawn Mower User Manual


 
English 23
1
2
4
3
Reparation instructions
Removing engine
The figures under Dismantling show Rider 11, 13
and Rider 16 in older designs (R16 up to the 2002
model), for a more recent Rider 16 design (2003-)
see Assembling the engine. The text applies to all
versions.
Remove the battery's fixing belt. Remove the safety
guard and remove the cable connections. Then, lift
out the battery.
Remove the cable which leads from the starter
relay to the start motor.
Mark up and remove the engine's electrical
connections.
Newer engines, pull the connector apart.
Remove the clamp holding the throttle and choke
wire. Unhook the wire at its at its attachment.
IMPORTANT INFORMATION
Hold the bolts so that the poles are not
put under strain.