Filter
Top Products
English – 13
RIDER 850
RIDER 850
Check that there is oil in the transmission’s oil tank.
Fill if necessary with engine oil SAE 10W/30 (class
SF–CC).
Wheels
Fit the wheels (certain markets). The tyre pressures
should be 60 kPa (0,6 kp/cm
2
/8,5 PSI) on all the
wheels.
To improve the driving capacity the pressure in the
back tyres can be reduced to 40 kPa
(0,4 kp/cm
2
/5,6 PSI).
Maximum permitted pressure is 100 kPa
(1,0 kp/cm
2
/14 PSI).
Checking the oil level in the
transmission
(Not Rider 11)
Remove the transmission cover. Loosen both
screws (one on each side) and lift off the
transmission cover.
Checking and adjusting of the mowing
deck’s ground pressure and parallelism
Carried out after checking the tyre pressures. See
respective sections in this Workshop Manual.
Delivery measures
IMPORTANT INFORMATION
Check and top up with oil after each test
drive. The oil level will drop if there are
air pockets in the transmission.
IMPORTANT INFORMATION
Different pressures in the front tyres will
cause the blades to cut the grass at
different heights.