Filter
Top Products
ALL METAL MODE:
There are two ways to enter the
ALL-METAL mode.
1) Turn the right knob (Disc/Notch) left
to the furthest counterclockwise
position. Then Press the Disc/All
Metal touch pad.
or
2) Turn the right knob (Disc/Notch) left
to the furthest counterclockwise
position. Then turn the detector on.
(The detector always defaults to
the Disc/All Metal mode when first
powered on).
DISCRIMINATION MODE:
To enter DISCRIMINATION mode,
1) Press the Disc/All Metal touch pad,
and
2) Turn the Disc/Notch control knob
clockwise past the “Disc”
indication.
In the DISCRIMINATION mode, the
detector will emit three distinct
tones, depending on the type of
metal detected.
As you turn the Disc Knob
clockwise, you will progressively
“discriminate out,” or eliminate
from detection, different types of
metals.
Refer to the illustration below as a
reference for the levels required to
discriminate out different objects.
The DISCRIMINATION mode is a
fixed-start-point system. As you turn
the knob to the right, more objects are
progressively eliminated, including the
items to the left. Use
DISCRIMINATION for coin-shooting
and detecting in trashy areas.
NOTCH MODE:
To enter NOTCH mode, press the
Notch touch pad.
In NOTCH mode, iron is automatically
eliminated.
11
MODES OF OPERATION
ALL METAL TOUCHPAD
DISC TOUCHPAD
NOTCH TOUCHPAD