Filter
Top Products
CM089-ST
|
7 " Swivel Tightening Windshield Suction Pedestal
Consumer Hotline:
(USA) (800) 841-0884
(INT'L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
The Mobile Mounting Specialists
TM
Step 1.
Step 2.
Locate a safe flat surface on
the dash or console to
mount the pedestal. Clean
the dash with the alcohol
pad provided. Let the dash
surface dry before applying
the adhesive disc (C).
Push the pedestal suction
cup (A) firmly to the disc (C).
Flip the lever (B) down to
secure the suction cup.
Dash Installation (Optional,
when disc is included)
Step 1.
Windshield Installation
(C)
(A)
(B)
Push the pedestal suction cup (A) firmly to the windshield.
Flip the lever (B) down to secure the suction cup.
CM089-ST
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or
air bag deployment.
Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.
(A)
(B)
(D)
Step 1.
Step 2.
Step 3.
Adjust the angle of the pedestal head by using both hands to
bend the gooseneck (D).
Adjust the angle and rotation of the pedestal head by loosening
the swivel tightening ring (E).
Attach the device cradle to the pedestal head by inserting the T-
tab (F) into the T-slot (G). (Cradle Sold Separately)
Pedestal Adjustment and Cradle Attachment
(Cradle Sold Separately)
(E)
(F)
(G)