Ariens 926039 Snow Blower User Manual


 
Page 1 of 4
Date: Jul. 22, 2011 No. B-2078
Ariens Company has learned that some hardware used to mount the engine to the frame on the Pro
models listed below may have been omitted. This allows the potential for slight shifting of the engine and
possible belt misalignment. The plastic protective wrap applied to the recoil housing must also be removed
to prevent potential engine overheating.
:
A service kit (p/n 52610400) has been developed which includes hardware, engine mount bushings and a
washer for the engine sheave. Dealers are to order and install kit # 52610400 on all affected units.
Kit contents (Figure 1):
For each unit requiring service Dealers will be reimbursed 0.5 hours of labor at their standard shop labor
rates.
Ariens Company
655 W. Ryan St.
Brillion, WI 54110
www.ariens.com
Service Bulletin
Product Family: 2012 Pro-Series Sno-Thro
©
Models
Subject: Missing Engine Mounting Hardware, Remove Protective Covering from Recoil Housing
Dealer Action: Install Missing Hardware, Remove Protective Covering
Model Description Serial Number
926038 Pro 26 035001 – 035202, 035211 – 035224, 035234 – 035235
926039 Pro 32 035019, 035042 – 035065, 035077, 035090 – 035092
926040 Pro 36 035001 – 035003, 035007, 035024, 035040 – 035045
Item
No.
Part No. Qty Description
1 06543100 4 5/16-18 Locking Top Flange Nut
2 06435700 2 3/8 x 7/8 Flat Washer
3
05500937 2
.325 x .400 x .795 Bushing
(Silver Finish, Thin Wall)
4
05531500 2
.328 x .50 x .75 Bushing
Gold Finish, Thick Wall)
5 06443000 1 1 x 2 Flat Washer
3
2
1
4
5
Figure 1