Ariens 916303 Snow Blower Attachment User Manual


  Open as PDF
of 7
 
© Copyright 2012 • Ariens Company • Brillion, WI 54110 04519800 5/12 Page 1 of 2
Instruction Sheet
Kit Number: 51600500
AMP BATTERY INSTALLATION KIT
For use on Models:
916302, 916303, 916003
Package Contents
Check contents of your kit for the parts listed (Figure 1):
PRIOR TO ASSEMBLY
1. Locally source four batteries that meet or exceed
the specifications shown in Figure 4.
IMPORTANT: For proper performance, batteries must
meet or exceed the supplied specifications.
ASSEMBLY
1. Position batteries in line long edge-to-long edge.
Ensure that battery leads all face in the same
direction.
2. Place one zip tie (item 1) under each battery.
Ensure that zip ties face in the same direction.
3. Connect battery harness (item 2) to battery. See
Figure 2.
4. Place cover (item 3) over batteries. See Figure 3.
5. Secure two middle zip ties at center of batteries.
6. Secure two end zip ties 1 1/4" – 1 1/2" from edge of
outside batteries.
WARNING: FAILURE TO FOLLOW
INSTRUCTIONS could result in personal injury
and/or damage to unit.
Read, understand, and follow all safety practices
in Owner/Operator Manual before beginning.
Item Part No. Qty. Description
1 04102900 4 Zip Ties
2 04502400 1 Battery Harness
3 04499500 1 Battery Cover
Figure 1
3
2
1
Figure 2
1
2
Figure 3
3
Position at center.
Position 1 1/4" – 1 1/2" from end.
 previous