Aquatic AI7INF7242 Hot Tub User Manual


 
18
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
March 2008
Rough-In Plumbing
Measurements
INFINITy SErIES model # AI7INF7242
Ship iT NOW! MODEL
GENERAL SPECIFICATIONS:
Tub Size 71 1/8” x 40 1/4” x 30”
181 cm x 102 cm x 76 cm
Bathing Well 40” long
25 1/2” wide
27 1/2” interior depth
Maximum Water Depth 17 3/4”
Shipping Weight 406 lbs. / 184 kg
Tub Weight Filled 1318 lbs. / 599 kg
Weight w/Equipment 206 lbs. / 93 kg
Gallons to Overow 134 gal. / 507 L
Gallons to Operate 1 bather: 96 gal. / 363 L
2 bathers: 80 gal. / 302 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
30”
27 1/2”
20 1/2”
23 1/4”
40 1/4”
Available without fast-ll waterfall spout
- See Price List for
Details
Comfort Pillow -- Oval or Rectangle
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or Gold
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
Only)
Hand Held Jet - Chrome or Polished Brass
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
Two Person Bath
STANDARD EQUIPMENT:
71 1/8”
Pump
INFINITy 7
40 1/4”
Blower
No alternate pump location available.
Fill Spout Location*
Back Angle 36º
Back Angle 19º
14”
17”
15”
5”
Fax-On-Demand
Document # 1164
*Available without fast-fill waterfall spout.
4”
This unit has a 3/4” female waterfall ll spout connection.
5”
11”
16 Hydrotherapy Jets including:
- 12 Shiatsu Back Jets
- 2 Full Size Pressure-Flo Hydrotherapy Jets
- 2 Recessed Rotary Massage Jets
Air Bath System:
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 2 HP Run-Dry Pump
- 1.5 kW Inline Maintenance Heater
- “Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Shiatsu Electronic Control Panel with Preprogrammed Jet Sequencer
- Bath-Side Electronic Control Panel with Temperature Display
- Pulsating Neck Jet Pillow
- 2 Reclining Lounge Seats
- Integrally Molded Fast-Fill Waterfall Spout/Optional
- please specify on order (valves not included)
- Chromatherapy
- Slip Resistant Floor
- Adjusta-Level Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty