Filter
Top Products
76
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
June 2008
Rough-In Plumbing
Measurements
22”
23”
59 1/2”
SErENITy 7
SErENITy Air Baths MODEL # AI7AIR6042 / AI7AIR6042TO (Tub Only)
GENERAL SPECIFICATIONS:
Tub Size 59 1/2” x 41 7/8” x 23”
151 cm x 106 cm x 58 cm
Bathing Well 42” long
24 1/2” wide
22” interior depth
Shipping Weight 212 lbs. / 96 kg
Tub Weight Filled 703 lbs. / 319 kg
Tub Only Weight 136 lbs. / 62 kg
Weight w/Equipment 122 lbs. / 97 kg
Gallons to Overow 70 gal. / 265 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Air Bath System:
- 65 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Raised Seat for Air Jet Action on Thighs
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- 2 Arm Rests
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- 2 Color Matched Grab Bars
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
• Comfort Pillow - Oval or Rectangle
• Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
Only)
• Waterproof Remote Control with infrared sensor
and 25’ cord
• Factory Installed Rigid ABS Tile Flange
• Remote Blower Wiring Kit
• Color Matched Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem-
perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
18 1/2”
41 7/8”
Note: Serenity tub only models feature
a Pre-leveled ABS Support Base.
Fax-On-Demand
Document # 1144
41 7/8”
2 1/4”
9 3/4”