Aquatic AI7242RC46 Hot Tub User Manual


 
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
November 2007
Rough-In Plumbing
Measurements
CENTury SErIES MODEL # AI7242RC46 / AI28AIR7242TO (Tub Only)
CENTury 46 MOTIF
GENERAL SPECIFICATIONS:
Tub Size 72” x 42” x 23 1/2”
183 cm x 107 cm x 60 cm
Bathing Well 42” long
26” wide
21 1/4” interior depth
Maximum Water Depth 17 1/2”
Shipping Weight 244 lbs. / 111 kg
Tub Weight Filled 1062 lbs. / 482 kg
Tub Only Weight 138 lbs. / 63 kg
Weight w/Equipment 182 lbs. / 83 kg
Gallons to Overow 106 gal. / 401 L
Gallons to Operate 1 bather: 87 gal. / 329 L
2 bathers: 68 gal. / 257 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Comfort Pillow -- Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel, or Oil Rubbed Bronze
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color
Matched (Bone, White and Biscuit
Only)
Hand Held Jet - Chrome or Polished Brass
Optional Pump Location
Remote Pump Location
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
Two Person Bath
12 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 4 Pressure Plus Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Chromatherapy LED Lighting
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
Fax-On-Demand
Document # 1073
42”
3 1/2”
12 1/4”
Deck
Width 3”
Total Width
5 1/2”
Back Angle
22˚
Back Angle
22˚
20 1/4”
72”
42”
21”
23 1/2”
66”
39 1/2”
68”
2
1
3
4