Filter
Top Products
26
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
March 2008
Rough-In Plumbing
Measurements
71 1/2”
CENTury SErIES Model # AI7236RC37
CENTury 37
35 5/8”
Two Person Bath
21 1/4”
35 5/8”
GENERAL SPECIFICATIONS:
Tub Size 71 1/2” x 35 5/8” x 24 1/2”
182 cm x 90 cm x 62 cm
Bathing Well 43” long
19” wide
20 1/2” interior depth
Shipping Weight 234 lbs. / 106 kg
Tub Weight Filled 820 lbs. / 372 kg
Weight w/Equipment 123 lbs. / 56 kg
Gallons to Overow 84 gal. / 318 L
Gallons to Operate 1 bather: 65 gal. / 246 L
2 bathers: 46 gal. / 174 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5
kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
This unit has a 3/4” male waterfall ll spout connection.
OPTIONAL EQUIPMENT:
• Available without Fast-Fill Waterfall Spout
- See Price List for
Details
• Comfort Pillow -- Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
Only)
• Hand Held Jet - Chrome or Polished Brass
• Factory Installed Rigid ABS Tile Flange
• Optional Pump Location
• Remote Pump Location
• Color Matched Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Fax-On-Demand
Document # 1021
STANDARD EQUIPMENT:
12 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 4 Pressure Plus Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 1 Recessed Fan Jet
- 1 Recessed Rotary Massage Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Integrally Molded Fast-Fill Waterfall Spout/Optional
- please specify on order (valves not included)
- Chromatherapy
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Extra Deep Bathing Well
- 2 Integrally Molded Safety Grasps
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
24 1/2”
18 1/2”
19 3/4”
Fill Spout Location
4 3/4”
10 3/4”
*Available without fast-fill waterfall spout.
2
1