Filter
Top Products
Rough-In Plumbing
Measurements
luxury SErIES MODEL # AI7236M / AI29AIR7236TO (Tub Only)
SaraSota MotIf
36 1/2”
5 1/2”
13 1/2”
Deck Width
2 1/2”
Total
Width 5”
SPECIfICatIoNS:
GENERAL SPECIFICATIONS:
Tub Size 73” x 36 1/2” x 25”
185 cm x 93.3 cm x 63.5 cm
Bathing Well 46” long
20” wide
23” interior depth
Maximum Water Depth 17”
Shipping Weight 213 lbs. / 97 kg
Tub Weight Filled 902 lbs. / 409 kg
Tub Only Weight 106 lbs. / 48 kg
Weight w/Equipment 144 lbs. / 65 kg
Gallons to Overow 91 gal. / 344 L
Gallons to Operate 72 gal. / 273 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
OPTIONAL EQUIPMENT:
• Chromatherapy LED Lighting
• Comfort Pillow - Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• 1.5 kW Inline Maintenance Heater
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
Only)
• Hand Held Jet - Chrome or Polished Brass
• 2 HP, 3-Speed Run-Dry Pump Upgrade
• Optional Pump Location
• Remote Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
7 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 1 Recessed Rotary Massage Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- Bath-Side On/Off Electronic Button
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
Fax-On-Demand
Document # 1296
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
Back
Angle
21˚
January 2008
20 1/4”
73”
36 1/2”
22 1/4”
25”
68”
68 1/2”
33”
1
2