American Standard 2390.202 IBSTC Hot Tub User Manual


 
H113
© 2008 AS America Inc.
To Be Specied:
Color:
Bath Filler: (specify nish)
Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
Pressure Test Kit
: 791363-0070A
PRINCETON™ RECESS BATH
WITH INTEGRAL OVERFLOW
AMERICAST
®
BRAND ENGINEERED MATERIAL
Revised 5/06
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Americast
®
brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
Photograph details integral overow and drain
assembly. Drain assembly included with bath.
*See faucet section for additional models available
Pressure Test Kit is necessary to seal overow and perform
system pressure test.
PRINCETON™ RECESS BATH WITH
INTEGRAL OVERFLOW
Americast
®
brand engineered material
2390.202 ICH (Chrome Trim) Left Hand Outlet
2390.202 ICHTC Same as above with Tub Cover
2391.202 ICH (Chrome Trim) Right Hand Outlet
2391.202 ICHTC Same as above with Tub Cover
2390.202 IPB (Polished Brass Trim)
Left Hand Outlet
2390.202 IPBTC Same as above with Tub Cover
2391.202 IPB (Polished Brass Trim)
Right Hand Outlet
2391.202 IPBTC Same as above with Tub Cover
2390.202 IBS (Brushed Satin Trim)
Left Hand Outlet
2390.202 IBSTC Same as above with Tub Cover
2391.202 IBS (Brushed Satin Trim)
Right Hand Outlet
2391.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
• Acid resistant porcelain nish
• Recess bath with integral apron and
tiling ange
• Integral lumbar support
• Beveled headrest
• Full slip-resistant coverage
• End drain outlet
Nominal Dimensions:
1524 x 762 x 356mm
(60" x 30" x 14")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
BARRIER FREE