Filter
Top Products
TT499 Drawing Table “Caddy”
Assembly Instructions
ALVIN & CO., INC.
Bloomfield, CT • Grand Prairie, TX
www.alvinco.com
HARDWARE LIST
Key Qty. Description
A 1 Back Support Bracket (Thinner)
B 1 Front Support Bracket (Thicker)
C 1 Bolt for Tray Support (3/4")
D 3 Bolts for Tray Support (1/2")
E 4 Nuts
F 4 5/8" Mounting Screws
A
NOV 2004
A
B
C
D
E
F
B
D
E
C
F
E
F
No. TT499-1 White • No. TT499-2 Black
1. The instrument tray is reversible. It can be
mounted to the left or right side of
your table.
2. Attach tray support brackets (A & B) to
the instrument tray using bolts (
C & D)
and nuts (
E). Please note that the thicker
bracket (
B) attaches to the front of the
tray and the thinner bracket (
A) attaches
to the back. Please also note the proper
position for the longer bolt (
C).
3. Position the assembled tray against the
left or right side of your table top and
mark the locations of the 4 mounting
screws on the underside of the table.
Pre-drill or pre-punch holes as desired.
4. Attach brackets to the underside of the
table top with the 4 mounting screws (
F).
Front
Back