Filter
Top Products
15
5.0 Applications and working methods US
5.1 Fields of application
The most important fields of application for this product are:
Agriculture Cleaning machinery, agricultural implements, stalls, equipment, and buildings
Transport Cleaning trucks, buses, cars etc.
Building and construction Cleaning vehicles, equipment, buildings etc.
Light industries Degreasing and cleaning of machines, production parts, and vehicles.
Service Cleaning vehicles, cleaning of walkways, patios, etc.
5.2 Working pressure
The high pressure system may be used with high or low pressure at your own option.
Low pressure Used for application of detergents and for rinsing.
High pressure Is used for cleaning/agitation.
Intermediate pressure As an example it may be used for the cleaning of surfaces, which will not
tolerate full pressure, i.e. soft surfaces.
5.3 Detergents
As standard, the system is delivered without a detergent injector.
If you want to use detergents or disinfectants these should be added through an external injector (see
section 4.1.4).
The most efficient cleaning is reached with detergents in conjunction with the high pressure cleaning. For
that purpose ALTO can offer you a series of products specially developed for high pressure cleaning,
among other fields within
Cleaning of vehicles, machines, stalls etc.
Degreasing Descaling
The products are water-based, and comply with the present requirements for easy biodegradability.
Contact your ALTO distributor for suggestions as to which product(s) will best meet your needs.
The method of application and the metering of the individual products can be found on product labels or
the data sheet.
Low-foaming detergents are applied through an injector and under low pressure. Switching to agitation
under high pressure is performed by turning the regulating knob on the double spray lance, or by attach-
ing a high pressure spray lance if you are working with Foam application equipment.
For foam cleaning you will have to use a special foam lance and injector. Insert the injector pickup hose
into the foam detergent. Attach the foam lance to the spray handle and you are ready for foam applica-
tion. After the foam application, open the by-pass valve ovnthe foam injector and replace the foam lance
with a spray lance.