Filter
Top Products
MAINTENANCE
MACHETE BOOM 3/09 Maintenance Section 4-4
©2009 Alamo Group Inc.
MAINTENANCE
TANK FILL
Check the sight gauge and add more Mbil DTE or
AW ISO VG 68 hydraulic fluid (Refer to list of rec-
ommended fluids) to bring the level up between 1/2
to 3/4 on the gauge. See Figure MntP-0017.
BLADES
Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when
they are worn excessively, bent, deformed, or out of balance.
Blades should always be replaced in pairs. Blades of different weights can cause serious
imbalance and damage to the machine and personnel. When replacing blades, take care to
replace the blade bolts, nuts, and washers.