AeroGarden 100302-BSS Greenhouse Kit User Manual


  Open as PDF
of 16
 
Replace
Bulb
Add
Nutrient
Basic Reminders About Your AeroGarden
(continued)
When “Replace Bulb” light on Control Panel illuminates after 6 months
of use…
•UnplugAeroGarden 3 about the time your light comes on.
•RemoveoldGrow Bulb and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulb is cool before handling.
•InsertnewGrow Bulb into Lamp Hood.
•PluginAeroGarden3andpressandhold“Reset”buttonuntil “Replace
Bulb” light blinks (3 seconds). Release “Reset” button, then press and re-
lease again. “Replace Bulb” light will go off and timer is now reset.
Early Grow Bulb Replacement
If you replace Grow Bulb before “Replace Bulb” light illuminates, be sure to
restart grow bulb timer as follows:
•Pressandhold“Reset”buttonuntil“ReplaceBulb”lightblinks–about9
seconds.
•Release“Reset”button.
•Quicklypressandrelease“Reset”button.“ReplaceBulb”lightwillblink
once and grow bulb timer will be reset.
Replace Grow Bulb – Order bulbs at www.aerogardensupport.com
* Check with local recycling authorities
for light bulb recycling availability in
your area.
11
NEED ADDITIONAL HELP?
For supplies and information, visit…
www.aerogardensupport.com
 previous next