• Re: CCR 2450 Toro Snowblower Problem
  
  
  I am getting spark to the engine but she won't fire. There is gas getting to the plug as well. Has anyone else had an issue with this unit?
  
  
  Was this comment useful?


• ccr 2450 snow blower
  
  
  Snow blower starts ok and works fine. After 20 nin. of use it seem like it over heat and cut off. I have to let it cool off to use it again
  
  
  Was this comment useful?


• garysoulman 2450 overheating
  
  
  sounds like you are using wrong oil mixture. ( not enough oil in gas)
  
  
  Was this comment useful?


• CCR 2450 Toro Snowblower Problem
  
  
  I think the 2450 takes a 50 to 1 oil to gas mixture ratio.
  
  Also, I figured out my spark problem as the gas was bad and didn't have enough octane. I emptied the tank, took off the bowl to the carb, changed the plug, fired a shot of carb cleaner into the carb and it fired right up! I gave it a few more shots of carb cleaner and let it run for a few minutes doing that, replaced the gas with a fresh mixture of gas & oil and it fired right up and has run like a champ!
  
  You learn something new every day! ;-)
  
  
  Was this comment useful?


• spark but no start
  
  
  start with fresh fuel and proper oil mixture,new spark plug with proper gap.i would remove carb. bowl check for water or dirt . for now
  
  
  Was this comment useful?

Add Comment