-
Posted by dsh on Sep 5th, 2008 at 7:00am
Engine model on tiller
I have a Tec.engine on a 040136 serials tiller.The plate is missing that has engine model number,can anyone tell me my engine model?
-
Posted by rogerarnett on Sep 4th, 2008 at 6:04pm
Replacing belts
How do you replace all the belts? How do you remove the deck?
-
Posted by tubabygirlfromhtown8 on Sep 4th, 2008 at 1:41pm
Need Starter
I need a started for this model. the serial number is LC114B70122. WITH A MOTOR 17.5.1/C OHV
-
Posted by dfairty1 on Sep 4th, 2008 at 8:01am
Oil seal replacement
I need to replace the oil seals in my Troy Bilt #12060 Tiller. I have pulled the Tine Assemblies off. Two top cover plates are removed. Drive train housing is removed from tiller body. Does the drive shaft need to come out next? And if so how?
Thanks, Dave.
-
Posted by icanbuildit on Sep 3rd, 2008 at 9:20pm
How old is this tiller
Troybilt Horse
-
Posted by dave358 on Sep 3rd, 2008 at 3:36pm
Wheel
Inner tube leaking
-
Posted by d_skans on Sep 3rd, 2008 at 10:26am
oil change
is there an oil plug,if not what is the procedure?
-
Posted by tcjr101 on Sep 2nd, 2008 at 9:36pm
Owners Manual
I would like an owners manual for my mower I cant find mine. thanks
-
Posted by flavla on Sep 2nd, 2008 at 3:01pm
model number so
I can get a manuel
-
Posted by r.pavese on Sep 2nd, 2008 at 11:09am
user manual
changing string
-
Posted by dennis191 on Sep 2nd, 2008 at 2:36am
transmission
can the transmission oil ware out, and or be replaced? the transmission is slipping / not engaging
-
Posted by glyn1938 on Sep 1st, 2008 at 3:34pm
how to start
bought it used new condition how to start
-
Posted by sparr1 on Sep 1st, 2008 at 12:23pm
spool
loading spool
-
Posted by katiepenn on Sep 1st, 2008 at 11:14am
string
How do you get the head open to get to the string?
-
Posted by slowturn on Aug 31st, 2008 at 3:24pm
drive belt problem
drive belt keeps coming off
-
Posted by syinkytoes07 on Aug 31st, 2008 at 12:31pm
stinkytoes07@yahoo.com
the ignition switch on my mower is broken and the charging cord is missing the piece that charges the mower and i also need a battery for it as well can you help me please.
-
Posted by ddombr1332 on Aug 30th, 2008 at 6:36pm
deck height
deck seems to be very low. I cut in the top nitch, but still almost scaps the lawn. Is there a way to raist he deck
-
Posted by yanknyky123 on Aug 30th, 2008 at 5:16pm
winding
how to wind
-
Posted by street341 on Aug 30th, 2008 at 3:51pm
trouble symbols
What do the symbols on the dash represent? Can't decipher using owners manual.
-
Posted by lajuanaje on Aug 30th, 2008 at 2:24pm
belt
where can I find the belt size
-
Posted by mike.mercer on Aug 30th, 2008 at 12:12pm
belt
how to tighten belt
-
Posted by sacheenmorgan on Aug 30th, 2008 at 11:23am
oil
what type of oil do I use in it
-
Posted by lblbarber on Aug 29th, 2008 at 7:02pm
manual
I need a manual
-
Posted by lblbarber on Aug 29th, 2008 at 7:01pm
manual
I need a manual
-
Posted by lblbarber on Aug 29th, 2008 at 6:56pm
manual
need manual
-
Posted by burgess.12 on Aug 28th, 2008 at 4:52pm
timming gear
need to know how to line up timming gear
-
Posted by bbillcollins on Aug 28th, 2008 at 4:02pm
How do I change the string (or line) on my gasoline timmer
Troy built gasoline line trimmer
-
Posted by cow_1 on Aug 28th, 2008 at 12:08pm
transmission
Is there a grease fitting on the transmission or does it take oil? If there is a fitting, where is it? And if it takes oil, where do you check and fill?
-
Posted by smitty349531 on Aug 28th, 2008 at 11:04am
engine will not start
troy-bilt will not start did all the checked plug wire gas
-
Posted by kmcdowell6112 on Aug 28th, 2008 at 9:25am
parts list
Need to find out the specifications for a Compressions Spring and where to buy???
-
Posted by khafnknight on Aug 27th, 2008 at 8:27pm
fuel
starts but acts like no fuel
-
Posted by pansit007 on Aug 27th, 2008 at 9:35am
ENGINE MANUAL
NEED ENGINE MANUAL
-
Posted by dmtarrant on Aug 26th, 2008 at 9:40pm
Econo Horse tine direction
Does the 6 hp econo horse tiller have dual rotating tines.
-
Posted by cassandrac on Aug 26th, 2008 at 12:51pm
still cant get clutch off
i need to clean or fix the recoil spring. we think its just has debri in there.. i removed the clutch part with the spring but the rest wont budge.. its the only thing standing in the way of removing the cover. i tried pliers and the chisel thing.. i dont want to break it.. any suggestions.
-
Posted by smwilkins on Aug 26th, 2008 at 9:44am
Disolved Gas Lines from Gas tank
1 line broke in half & the other return line sheared off from the bottom of the Gas tank. Will buying both Line assembly & Return line fix my problem?...or should I replace all fuel lines?.........TIA
-
Posted by magic on Aug 25th, 2008 at 4:50pm
operators manual/owners manual/etc
needsaid manuals ASAP
-
Posted by jgibson11 on Aug 24th, 2008 at 5:08pm
starter cord broke
How do I rewind the starter cord on the abve saw???
My Father took it apart and gave up then gave it to me to try to repair.
-
Posted by kirbycarroll5 on Aug 24th, 2008 at 3:07pm
Low Pressure
Suddenly, I am experiencing low pressure on my pressure washer. Any clues why this might happen?
-
Posted by mercedesz on Aug 24th, 2008 at 2:14pm
tractor won't move
When I put the tractor in gear it won't move. Can anyone tell me what's going on?
It will move in the higher gears.
-
Posted by clayton568 on Aug 24th, 2008 at 12:15pm
Pressure wand end keeps blowing apart
It is clear no blockage anywhere
-
Posted by sharonls60 on Aug 24th, 2008 at 10:15am
HOW TO ENGAGE CUTTING BLADE
I AM TRYING TO MOW I WAS INSTRUCTED BUT FORGOT HOW TO ENGAGE THE CUTTING BLADE. I GOT IT STARTED I DROVE IT FORWARD BUT I DONT SEE THE ACTUAL BUTTON SWITCH WHATEVER TO MAKE THE BLADES GO HELP!!
-
Posted by rhayes on Aug 24th, 2008 at 10:07am
outer spool removal
Can't figure out how to get the outer spool off the shaft.
-
Posted by lrw4322 on Aug 24th, 2008 at 9:33am
change string
can't ope up holder
-
Posted by stevenedwin315 on Aug 23rd, 2008 at 9:35pm
age of this model?
Just obtained this model but curious about the age and any other information as to its ability and size. Other request was made for a user manuel. Thanks!
-
Posted by drus on Aug 23rd, 2008 at 5:59pm
Drive belt routing
The drive belt came off and I am uncertain as to the configuration of putting the drive belt back on.
-
Posted by graham1964 on Aug 23rd, 2008 at 4:41pm
want start
I am a senior and have a troy-bilt 10 hp generator. We needed it last night and it would not crank.I looked at the spark plug,checked to see if the carb was getting gas.All fine pulled about 20 times off and on with no luck. We haven't run this darn thing very much at all,maybe 6 hr. Wish I could se…
-
Posted by arobinson70615 on Aug 23rd, 2008 at 11:15am
transmission problems
My lawn tractor will only go in reverse. It tries to go forward. It slips in and out of forward gear.
-
Posted by olingerje on Aug 22nd, 2008 at 7:58am
RZT series tractor-mustang RZT
engine smoking
-
Posted by mcdonaldpeck on Aug 21st, 2008 at 4:55pm
Need manual
need drive belt size, etc.
-
Posted by mcdonaldpeck on Aug 21st, 2008 at 4:50pm
Missing manual
Does anyone have a copy of the manual for this chipper?
-
Posted by pdebock7 on Aug 20th, 2008 at 9:52pm
parts
The bracket holding the carburetor broke. I can't find a part number for this. Can I buy a new bracket?
-
Posted by jond_1984 on Aug 20th, 2008 at 9:05pm
grass bag
I recently purchased a rear lawn bag for the mower. When I used it, I find that it leaves a trail of grass clippings on the ground. I have a mower w. a smaller enger and it picks up everything. Do I have to set the mower to a certain height? Or, is this a piece of crap and I wasted $100 on a rear ba…
-
Posted by marymouse on Aug 19th, 2008 at 11:32am
Replace Piston
Piston skirt is shorter on one side. Does the short side go towards the intake/exhaust ports or away from them?
-
Posted by cwatts on Aug 19th, 2008 at 10:23am
Transmission
Need to Know what fluid goes in the transmission casing
-
Posted by orangevolsut on Aug 18th, 2008 at 10:30pm
dies
when i start it with the choke on it will run. But when i pull the throttle and give it gas it run for about 6 seconds then dies. what is wrong with it.
-
Posted by 3394frankl on Aug 18th, 2008 at 10:00pm
belt adjustment
Can any body dirrect me to a maint. manual for a troybuilt horse. Or, explain how to adjust the drive belt on same? I've been wrench twisting for over 40 years. 1/st time I ever saw a belt without an adjustment or tensioner.
-
Posted by vlparobinson on Aug 18th, 2008 at 4:19pm
manual
Manual
-
Posted by vlparobinson on Aug 18th, 2008 at 4:10pm
Owners manual
Over heats and need to adjust the blades
-
Posted by w-h on Aug 18th, 2008 at 3:55pm
transmission belt
how to replace trans belt is not in operatore manual, is there a service manual for this problem?
-
Posted by rayloisflory on Aug 18th, 2008 at 2:25pm
Need Complete breakdown and parts manual
I have found what seams to be what looks like small needle pins (Needle Bearing?)at the oil filler hole. I need to know where they come from and what item I must replace to correct my problem . A internal breakdown view alomg with the part no.'s would maybe help me to locate where thses items came f…
-
Posted by ravenwoodhomeimprovements on Aug 18th, 2008 at 9:13am
mower won't run.
mower starts for a second then won't run.
-
Posted by dgatorfan on Aug 17th, 2008 at 7:59pm
recoil (to start) will not come out
the recoil cord will only come out about 6 inches. if you play with it you can get the cord to come out little by little, but as soon as you let it go, it is stuck again?
-
Posted by mackie12247 on Aug 17th, 2008 at 2:12pm
adding line
How do you add line to your trimmer. I purchashed a used trimmer and had not owners manual with it.
-
Posted by dolm1881 on Aug 17th, 2008 at 1:09pm
manual
re-assembly diagram. parts list
-
Posted by sal_marchionda on Aug 17th, 2008 at 10:10am
wheels seem to be engaged
I have my gear set to netural but my wheels are still locked im not able to roll it freely
-
Posted by poohrat1981 on Aug 16th, 2008 at 8:28pm
Belt Problems
I have replaced the belt to make the blades turn, and now the belt is too loose. I cannot figure out how to tighten it, and the manual does not show how, either. Can someone please, oh please, help me?
-
Posted by lozomo28 on Aug 16th, 2008 at 7:19pm
Replacing Blades
My Blades needs replacing. How do I get them off without the blades turning everytime I try to remove the bolt and what type of blades do I buy? My mower is a 42 inch cut with 2 blades.
Craig
-
Posted by guzjd711 on Aug 16th, 2008 at 4:19pm
Starter string broke
How do I replace the starter string
-
Posted by silverado196 on Aug 16th, 2008 at 1:24pm
will not run in run setting
will not run in run setting
but will run in choke
-
Posted by wayne_williford on Aug 16th, 2008 at 11:47am
fuel filter
how to install a fuel filter in gas tank
-
Posted by pleaser7356 on Aug 16th, 2008 at 8:23am
changing the oil
How to change the oil
-
Posted by deveshpatel on Aug 15th, 2008 at 10:57pm
How to replace deck engagement spring
The spring that engages the deck broke. One end of the spring is connected with Deck engagement cable. so do I buy just the spring and take the cable off and put it thru the spring (one end) and the other end thru the Deck engagement cable bracket? Also, which spring shoud I buy - SKU: 732-04280A…
-
Posted by pgallen54 on Aug 15th, 2008 at 7:10pm
pallen
how to install deck belt on lawn tractor model#13an779g766
-
Posted by rigsbylillian on Aug 15th, 2008 at 6:45pm
manual
Bought second handed didn't have a manual. I need one.
-
Posted by jflf on Aug 15th, 2008 at 5:03pm
need wiring diagram
need wiring diagram
-
Posted by usathome6155 on Aug 14th, 2008 at 6:38pm
cord rewind
model is the easy pull. string will not rewind.pulled all out.
-
Posted by citarg on Aug 14th, 2008 at 2:37pm
Trimmer starts but won't run
Hello, I have TB75SS trimmer. I put in a new spark plug, cleaned the spark arrestor and cleaned the air filter. I can start the motor with the prime button pumped and the red "flag" for the choke in position. The engine starts and then as soon as I put my finger on the trigger to give it some gas…
-
Posted by jackdll1 on Aug 14th, 2008 at 1:47pm
Will not start
When I pull the string does not even try to start.
-
Posted by larry_meadows37762 on Aug 14th, 2008 at 10:54am
Manual
I have purchased a floor model of chipper shredder at Lowe's and have been unable to obtain an owners manual
-
Posted by burnelllll on Aug 13th, 2008 at 8:32pm
Will not run
I replaced the flywheel and key and the trimmer will not crank
I am wanting to know if there is a setting between the flywheel and the modulator any help that you can give me wolud be very nuch appreciated
-
Posted by gc36603 on Aug 13th, 2008 at 8:31pm
Want Start with key
The Lawnmower will not start with the key it just make a clicking sound. It will start when you pull it.
-
Posted by wlp5775 on Aug 13th, 2008 at 8:26pm
Transmission
"troy-bilt big red" lawn tractor. Transmission has frozen up. Purchased 5/8/04. Any warranty?
-
Posted by pruysenaars on Aug 13th, 2008 at 4:13pm
Oil leak
I have a straight shaft 26.2cc 4 cycle engine. I need to know how to get the clutch off. Info not in manual!!
-
Posted by universitybaptist on Aug 13th, 2008 at 2:04pm
Parts Needed
Looking for hammer or flays for this model. Told it was a Garden ay from Troy-Bilt, and that there are no parts available. Help appreciated.
-
Posted by moonvalley1 on Aug 13th, 2008 at 11:50am
removing string head
cannot get the head off to replace string
-
Posted by jerry on Aug 12th, 2008 at 11:19pm
starterr and clutch
Starter recoil spring broken.
how do you dissasemble and replace/recoil rope?
-
Posted by recldr2003 on Aug 12th, 2008 at 6:52pm
fornt wheel assembly
the right fron wheel is wobbly and the hieght setting won't stay in place
-
Posted by justinswiger on Aug 12th, 2008 at 5:17pm
rear drive axle
wont engage when pedal is pushed
-
Posted by sk8er_kid2010 on Aug 12th, 2008 at 3:52pm
deck belt assembly
proper webbing of belts
-
Posted by ebuchananebuchanan on Aug 12th, 2008 at 12:17pm
Blades won't engage
MOD. 13AT609G766
New Belts & top belt too loose to engage. belts are routed corectly
-
Posted by katkearney on Aug 11th, 2008 at 8:26pm
Blade wont engage
Blade wont engage
-
Posted by jwadams76 on Aug 10th, 2008 at 9:52pm
blade for weedeater
weedeater needs blade cutter
-
Posted by sploink on Aug 10th, 2008 at 9:30pm
Replacement Belt Size
Replacement V-Belt
-
Posted by jbhh on Aug 10th, 2008 at 9:18pm
Carbarator mixture adjustment
need to know what the adjustment for carb. mixture screws. If I turn both screws in clockwise, how many turns counterclockwise. This was bought at a flea market adjustments are not correct I am sure. Thanks John
-
Posted by romanfedyk on Aug 10th, 2008 at 2:32pm
Need Manual
Hello, I need an operators manual for this chipper vac.
Thank you
-
Posted by krfoster on Aug 9th, 2008 at 8:30pm
owners manual
i need the owners manual.
-
Posted by sreid on Aug 9th, 2008 at 2:04pm
Looking for manual to change string
Looking for manual or instructions on changing string.
-
Posted by missydavetuttle on Aug 8th, 2008 at 7:22pm
Changing Blades
I'm trying to change the blades. Right tight and left loose ?
-
Posted by cindyhowell93 on Aug 8th, 2008 at 11:08am
diagram for blade belt
Blade belt diagram
-
Posted by kreidermay on Aug 8th, 2008 at 8:30am
belts
directions to replace all belts
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Keeping Hot Electronics Cool
Quick Steps to a Long-Lasting Paint Job: DIY Guide
Induction Cooktops: Cool to the Touch
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.