Login

RSS What is this?

Are You an Employee of Troy-Bilt?

Let us know you're looking at the manuals we've found and help us provide better support to your customers.

Email address:
Self-Support

Troy-Bilt




Do You Know About These Manuals?

  • Troy-Bilt Push Lawn Mower
    Posted by jdaw_9 on Jul 3rd, 2008 at 10:37pm

    Please help find the manual for this Troy-Bilt Push Lawn Mower
  • Troy-Bilt Gas String Trimmer
    Posted by gitkov1945 on Jul 3rd, 2008 at 4:47pm

    shop manual
    need shop (have operator's manual) manual for TB475SS 4 cy gas string trimmer
  • Troy-Bilt Gas String Trimmer
    Posted by davidpix2000 on Jul 3rd, 2008 at 3:47pm

    brush cutter attachment
    my brush cutter attachment will spin up but will not cut brush. Blade is on correctly and both drive cables are in tact.
  • Troy-Bilt Push Lawn Mower 80289
    Posted by mderfd on Jul 3rd, 2008 at 10:12am

    I need an owners manuel
  • Troy-Bilt Lawn Tractor 13104
    Posted by expresssignatures on Jul 3rd, 2008 at 8:47am

    engine manual
  • View All

Can You Help With These Problems?

  • Troy-Bilt Tiller 15006 4hp standard
    Posted by jbentley on Jul 3rd, 2008 at 7:11am

    Service Manual
    Would like to download a service manual for this tiller
    thanks
  • Troy-Bilt rear tine tiller 21A-643B711
    Posted by dkretired on Jul 2nd, 2008 at 6:02pm

    Repair Manual for a Troy-Bilt 643B Super Bronco
    I need to find a repair manual for this machine. I have to replace the complete drive shaft and am unable to get any support from troy-bilt or MTD. All I get is the run around. This is the last troy bilt item I will ever buy or recommend. They have destroyed a good name by farming it out to MTD
  • Troy-Bilt Lawn Tractor 13am77tg766
    Posted by srcua16 on Jun 28th, 2008 at 11:19pm

    pulley
    we bought a replacement for a bent pulley(idle). When he replaced the pulley, something was not correct and we cannot figure out how the pulley was standing vertical instead of lying flat. Does anyone have a diagram that is better than the one in the owner's manual.
  • Troy-Bilt Grass Trimmer
    Posted by stabvett on Jun 28th, 2008 at 4:18pm

    Upper drive
    The upper shaft is spinning ; appears that upper socket is spinning over lower square shaft slower shaft-Store warrenty replaced upper end after one day now it's occuring again(two years later). Do I need to replace the intire upper Drive shaft Housing Assemply? What is the easy way to accomplish this procedure.?
  • Troy-Bilt Grass Trimmer TB495 EZ Line Advance
    Posted by lizardi123 on Jun 24th, 2008 at 4:18pm

    I need part # 69700417
    I need double spool cord attachment known as part # 69700417. I contacted The Power Center at 954-463-0772 and they could not refer me and did not have the part. I live in the 3315 area but can drive to whereever for this part at a decent price. What is the price and who is the distributor?
  • View All

InSinkErator Evolution Series Food Waste Disposers: High-Performance, Low Noise
Grind almost anything. Hear next to nothing. Complete your kitchen with an InSinkErator® Evolution Series® food waste disposer and discard your leftovers with virtually no sound. Evolution Series models are equipped with MultiGrindTM and SoundSealTM technology, enabling the disposal of just about any food waste with up to 60% less noise than a standard disposer.

Five Evolution Series models are available to choose from to fit your unique needs: Excel, Essential, Compact, Cover Control, and Septic Assist. All Evolution Series disposers carry up to a seven-year We Come to YouTM In-Home Parts and Labor Service Warranty and are currently available at major home centers, retailers, and plumbers nationwide.

Member Tips

  • Troy-Bilt Gas Trimmer/Edger
    Posted by terrencesantos on Jul 2nd, 2008 at 6:04pm

    owners manuel
    how to replace/open cutting cord
  • Troy-Bilt Econo-Horse H60-75506P
    Posted by Mary on Jun 23rd, 2008 at 5:33pm

    my tiller will not go to reverse after i pull the handle to reverse.
    HELP!!!!!
  • Troy-Bilt Gas String Trimmer TB525CS
    Posted by kevil_rob on Jun 21st, 2008 at 11:07pm

    string it up
    2 ways: easy (sometimes), push end of string into hole on side until it appears out the bottom of the spool. Then push the end into the hole close to where it exited and pull it tight. Do the same on the other side of the spool. You should only havea about 15 feet of string for each side. Turn the ridged ring on the spool (inner spool ring looking at the bottom of the spool), counter clockwise while holding outer spool hoiusing (tension should be kept on strings during this process).

    If that doesn't work for you undo the bump button by unscrewing it counter clockwise as you hold th3e outer spool. Take the spool out of the housing and run the 15 foot string into the slot. It should appear out the bottom of the spool and ffeed the end into the nearby hole and pull it tight. Repeat the process on the other slot in the other section.

    Wind teh string clockwise I believe. It should say on thye spool if you look closely at the bottom. When you get the string wound, pull the string into onef of the notches on the top of the spool. Do likewise with the other string on the other side.

    Feed the strings through the two holes in the outer spool as you insert the spool into the outer housing. Replace the bump button.

    You should be reeady to go.
  • Troy-Bilt Tiller
    Posted by bglawe on Jun 20th, 2008 at 3:34pm

    Freewheel mode for some tillers
    The tuffy tillers cannot be put in neutral to roll. These machines require removing the pins securing the wheels to the axle, moving the wheel in toward the frame of the machine, and putting the pin through just the hole in the axle. This will put the tiller in freewheel mode. The wheels should only be left like this for transportation. If the wheels aren't pinned to the axle during operation the tiller will run away from the operator.
  • Troy-Bilt Gas String Trimmer TB525CS
    Posted by toddb78 on Jun 8th, 2008 at 1:22pm

    ?
    how to string it up?
  • View All







OwnerIQ Network | Manufacturers | About | Research | Press