-
Posted by whatsurname88 on Sep 20th, 2008 at 6:29pm
electric starter
The blade switch is disengaged, the brake is set and I'm sitting in the seat, but the starter will not operate.Is there another lockout somewhere that I'm missing?
-
Posted by myjunken on Sep 14th, 2008 at 11:16pm
gasket
oil leeak
-
Posted by realstinger on Sep 12th, 2008 at 10:29pm
z6002m deck
how to remove the center double pulley
-
Posted by erarandy on Sep 8th, 2008 at 3:20pm
Need a Service/Parts Manual
Maintanance Dept. P.A.I.S.D
When I engage the blade it dies,when I disengage the parking brake it dies.
Mac
-
Posted by ecl1alp on Sep 6th, 2008 at 4:30pm
Joystick Control
Mower mover faster with joystick in front left position. Middle and right front is slower. Seems to have dead spots in the joystick. Is this the pump on the right or could it be something less expensive
-
Posted by cabelasguy on Aug 27th, 2008 at 6:01pm
looking for part #
Looking for part # for glow plugs on kubota 21hp diesel engine.
-
Posted by saharmon7046 on Aug 23rd, 2008 at 9:55am
belt on back of motor and gas linkage hook up
i brought this mower to fix but it was in a thousand pieces. i need to know how the two belt on the back of the motor go on and how the gas throttle linkages hook up on the carburator.
-
Posted by tronsnb on Aug 20th, 2008 at 8:24pm
lawn mower blades
Model #Z2004K
Deck # Z6004M
I need a number to buy replacement blades. Cannot find them anywhere.
-
Posted by saharmon7046 on Aug 15th, 2008 at 5:13pm
need a picture
how do the belts on the back of the motor go zmt2500kh the serial# 01740456
-
Posted by henriettaosborne on Aug 6th, 2008 at 1:08pm
Mower deck
need mower deck
-
Posted by ccfm31 on Aug 5th, 2008 at 8:19pm
parts manual
Break sticks
-
Posted by rumarcus on Aug 5th, 2008 at 5:45pm
stiff/rigid hydraulic hand lever
ztr mod z4804m
-
Posted by dianne on Aug 3rd, 2008 at 2:33pm
drive belt
high torque 675 AA-73
REPLACES SNAPPER 1873
WHAT IS THE LENGTH AND WIDTH OF THIS BELT?
-
Posted by cat1542 on Jul 29th, 2008 at 6:36pm
Trans Fluid amount filters
Bought this used and it came with no instruction manual - how much trans fluid to use and the filter numbers or parts number. Thanks!
-
Posted by mfruge on Jul 27th, 2008 at 7:28pm
not cutting!!!!
When I pull up on the pto switch the blades do not engauge.Someone told me this Could be the electric clutch. I don't know anything about this..Can someone help..
-
Posted by beard on Jul 27th, 2008 at 4:35pm
wiring manual
wiring manual
-
Posted by edandmarge on Jul 24th, 2008 at 4:27pm
manual move push
mower cannot be pushed. rod loose under joy stick
-
Posted by edandmarge on Jul 24th, 2008 at 4:24pm
manual move push
mower cannot be pushed. rod loose under joy stick
-
Posted by montnvee on Jul 23rd, 2008 at 1:03am
locating model number
Can you tell me where to locate my model and serial number in my older model (2002)snapper z rider?
-
Posted by crrobins on Jul 18th, 2008 at 8:47am
price for used mower
I need to sell my mower, grass catcher and trailer. How much is it worth?
-
Posted by danlumpy on Jul 17th, 2008 at 2:52pm
rear whell locked up
rear wheel locked up
-
Posted by lutschwab on Jul 14th, 2008 at 10:29pm
idler pulley brackets
need new brackets and bushings for the idler pulley.
-
Posted by slicks on Jul 14th, 2008 at 12:17am
Blows fuse when mower is turned on
There was a limb run under the mower and now when a fuse is placed in the mower it blowes a fuse. I need a witing schamatic to trace the problem
-
Posted by fchuck123 on Jul 13th, 2008 at 11:04am
Mower starts - will not move
Our mower will start and engine runs, blade will engage and turn. But when transmission is placed in drive and clutch/brake released, engine sputters out and stops. This also occurs when the clutch pedal is released and the transmission is in neutral and blade is not engages.
-
Posted by letric138 on Jul 13th, 2008 at 10:04am
mowing blades
On my mower when I turn the blades on it does not take much to make them stop spinning.The belt does not appear to be slipping.Also when this happens it does not bog the motor down. Any answer will help..Thanks
-
Posted by jnoe on Jul 6th, 2008 at 3:03pm
Parts manual
I have the Operator's manual but I need the Parts manual and place to order them
-
Posted by aloha on Jul 3rd, 2008 at 8:40pm
Belt Repair Information
I need a instruction on replacing the Clutch, Drive and Blade Belts.
-
Posted by scgoodsam on Jun 24th, 2008 at 9:27pm
Belts
When I had used my new snapper for 17 hours the engine pully bult broke. I took the mower back th the deller and they replacted the belt. I used the mower for thirty minutes and the belt was twisted on the engine pully. I took the mower back last week and they still have it. Are you having a pro…
-
Posted by jemerrell54 on Jun 6th, 2008 at 3:15pm
Replace shaft in pulley on deck
shaft broke on pulley wheel, and blade came off. Need iinstructions t0o replace shaft.
-
Posted by hollywoodal on Jun 5th, 2008 at 7:05pm
KEY SWITCH
what is the correct key switch, i accidentally threw out the old one before getting the new one
-
Posted by mary4410 on Jun 4th, 2008 at 12:45pm
Drive Belt Diagram
Replaced Drive Belt, now the mower goes backwards and in a circle.
-
Posted by kmccutchen on May 30th, 2008 at 10:08am
Clutch Belt
Need manual for clutch belt replacement. Can I download one from internet.
-
Posted by djmielke on May 23rd, 2008 at 2:30pm
PARTS Manual Service Manual
U Joint Drive To More Deck
-
Posted by figley on May 12th, 2008 at 10:06pm
Owners Manual
Need Owners Manual for a Z rider commercial mower
ZU2014K
-
Posted by rmfestavan on May 3rd, 2008 at 11:28am
air
what tire psi is need in all tires?
-
Posted by tai.h.phan on May 2nd, 2008 at 12:22pm
Doesn't start
Don't have the manual, need a copy of the manual to learn how to start it and the necessary maintanecnce on it
-
Posted by cbshop001 on Apr 27th, 2008 at 7:39pm
parts manual
Can't fins one
-
Posted by alporter11 on Apr 20th, 2008 at 7:39pm
Where is model and Serial # on snapper truf cruiser tractor
I'm trying to locate the model and serial # for my Snapper diesel turf cruiser tractor. The mower deck is zf 6100M. The engine is a Kubota D722-E. Any help appreciated. I CAN NOT locate Exact model.
-
Posted by reitasanders on Apr 10th, 2008 at 8:01pm
gear shifting
older snapper mower, gear is difficult to shift; looking for grease fittings