Login

RSS What is this?

Are You an Employee of Ryobi?

Let us know you're looking at the manuals we've found and help us provide better support to your customers.

Email address:
Help Requests

Ryobi Gas Trimmer/Edger




Can You Help With These Problems?

  • Posted by pbtramp on Oct 14th, 2008 at 1:23pm

    starter rope
    Can't tension new starter rope.
  • Posted by bill.cart on Oct 14th, 2008 at 3:29am

    no spark
    no spark so I replaced module assembly, need gap for module and flywheel
  • Posted by francisdalton on Oct 13th, 2008 at 10:39pm

    Head Assembly
    How is it removed?
  • Posted by cdvalois on Oct 13th, 2008 at 9:25pm

    won't run
    engine starts but only runs a short time with the choke on, replaced carb kit , fuel lines and filter, checked intake gasket
  • Posted by nimsr3 on Oct 11th, 2008 at 5:23pm

    Royobi 132 R string loading instructions
    I cannot figure out how to replace the string. I lost my original manual
  • Posted by russborger2000 on Sep 29th, 2008 at 7:05pm

    ryobi 725r string trimmer
    routing of the 3ea fuel lines
  • Posted by joel.potts1 on Sep 29th, 2008 at 6:35pm

    trimmer head
    need the trimmer head
  • Posted by daddydnpa on Sep 24th, 2008 at 10:09am

    Manual
    gas trimmer / edger
  • Posted by daddyhurst2 on Sep 19th, 2008 at 12:22pm

    fuel line
    fuel line routing
  • Posted by luke2529 on Sep 17th, 2008 at 12:54pm

    Starting problem
    I ran out of gas and since have been unable to restart edger,
  • Posted by troehrig5 on Sep 17th, 2008 at 10:27am

    Removing the Outer Spool Assembly
    I have a 2079r weedeater and bought the new spool assembly from Home Depot. How do I get the out spool off of the weed eater to install the new spool assembly?
  • Posted by jimehill on Sep 14th, 2008 at 11:40am

    Cutting shield broke
    Where can I get a replacement cutting attachment shield for a Ryobi 705r gas trimmer?
  • Posted by clint.searcy on Sep 7th, 2008 at 4:58pm

    Need a hedge clipper adapter
    looking to purchase a hedge clipper adapter...
  • Posted by sfont99 on Sep 7th, 2008 at 12:54pm

    cutting wire
    How do you pull out more wire from the spool when it gets short?
  • Posted by corey8ross on Sep 6th, 2008 at 8:47pm

    Won't start
    I just bought two Ryobi trimmers at an estate sale. Model No. 720r and a 700 series. One of them has the primer bulb rotted and broken, but both won't start.
  • Posted by craig.kegerise on Sep 2nd, 2008 at 2:05pm

    Bumper knob
    I cannot remove the bumper knob to replace the string. It will not turn. Any suggestions?
  • Posted by decondb1 on Sep 1st, 2008 at 8:06pm

    run
    won't stay running
  • Posted by rudy-weezy on Aug 27th, 2008 at 10:08pm

    manual
    bad clutch
  • Posted by dabbler15 on Aug 27th, 2008 at 11:14am

    Line replacement
    how to replace line
  • Posted by sgtshea on Aug 24th, 2008 at 3:18pm

    help
    need fuel line sizes for the ryobi 725r gas trimmer
  • Posted by talexander2 on Aug 19th, 2008 at 10:45am

    will idle but not run
    starts and idles but when I add throttle the engine dies. maybe running lean. is there a way I can adjust the mixture if this is the problem? This is a new trimmer.
  • Posted by sragan on Aug 16th, 2008 at 3:55pm

    spark plug
    I have a 4 cycle ryobi 790r brush cutter. I need a spark plug for it. The plugs says GENUINE REPLACEMENT PARTS A4RTF. Please tell me if I can use champion plug and what size. I took the old plug to my local hardware & auto parts stores and they said good luck in finding one.
  • Posted by nordman62 on Aug 11th, 2008 at 7:06pm

    Ryobi 780R 31cc
    This trimmer is really hard to start. I put a new spark plug with no amelioration. Ant idea??
  • Posted by lewisandtricia on Aug 10th, 2008 at 3:07pm

    fuel line routing
    I have replaced the fuel lines on my trimmer but I may have installed them incorrectly. I need a teck drawing to check by. The old lines were brittle and broke off so I was unable to replace systematically.

    Thank You! Lewis A.
  • Posted by bwhale45 on Aug 9th, 2008 at 11:28am

    owners manual
    Roybi trimmer
  • Posted by lovtolah on Aug 8th, 2008 at 11:03am

    Gas Lines are Dry Rotted
    Need help in locating where the lines reconnect
  • Posted by software2008 on Aug 2nd, 2008 at 3:09pm

    Brush Trimmer 2090r Manual
    I'm looking for the Ryobi Pro Model 2090r Trimmer.
  • Posted by bbrandt1 on Jul 29th, 2008 at 3:37pm

    Won't start, has spark
    I have a Ryobi 790r engine for my edger, blower, etc.

    It will not start. I have checked and it is getting spark. I took carb. apart anc cleaned, but engine doen't want to fire. Any suggestions. Thanks
  • Posted by meshang on Jul 29th, 2008 at 3:19pm

    replace fuel line
    need to replace fuel line on ryobi trimmer model#725r ez please help
  • Posted by luckysdad on Jul 28th, 2008 at 10:43pm

    fuel line replacement
    where to place the fuel lines
  • Posted by clyde.morris on Jul 26th, 2008 at 5:18pm

    Fuel line replacement
    How to replace broken fuel line?
  • Posted by info on Jul 26th, 2008 at 12:08pm

    fix recoil
    fix recoil - plastic tabs worn off
  • Posted by greggorywaterman on Jul 21st, 2008 at 3:47pm

    replacing trimming cord
    replacing trimming cord
  • Posted by nena.yochum on Jul 21st, 2008 at 12:07pm

    adding new line
    adding new line
  • Posted by rollie_stephens on Jul 20th, 2008 at 10:54am

    Replacement - Plastic Air Filter Cover
    The platic air filter cover (snaps over the air filter) broke on my trimmer. Where can I find a replacement part fot that?
  • Posted by bfermium on Jul 9th, 2008 at 7:16pm

    replacing trimmer line
    I can't figure out how to open it up to add more line (and I lost the manual in a move.) email: bfermium@gmail.com Thanks! Barry
  • Posted by cadillac1987 on Jul 9th, 2008 at 6:31pm

    trimmer
    how do you change the line
  • Posted by kyre on Jul 8th, 2008 at 11:48pm

    disassembly to access pull cord
    I need to remove the clutch rotor/clutch drum from the drive shaft in order to remove the plastic housing and fix the workings between pull cord and flywheel. How is this done?
  • Posted by mcasti111 on Jul 8th, 2008 at 5:51pm

    carburator adjutment
    need to adjust hi speed and idle mixture screws, please help. thank you
  • Posted by didally on Jul 7th, 2008 at 7:02pm

    MANUAL
    NEED MANUAL TO REPAIR CARBERATOR.
  • Posted by toyotamr2gt on Jul 4th, 2008 at 5:49am

    part numbers or parts breakdown
    The 3 gas lines on my Ryobi gas trimmer rotted and broke. I need to purchase the 3 (2 clear 1 green) before I can use it. I need the numbers and source or parts breakdown.
  • Posted by wm3146 on Jun 23rd, 2008 at 2:17pm

    ryobi 700 31cc trimmer
    how do i change the line on the trimmer?
  • Posted by ahern_katie on Jun 10th, 2008 at 11:07pm

    unable to start ryobi 725r trimmer.
    I sounds as if the pulley start is not catching the inner mechanism to start the machine. I changed the spark plus and dont think it is that....would love to be able to fix this myself if possible. Please give me any guidance to help me! Thank you!
  • Posted by migueladlc on Jun 2nd, 2008 at 5:28pm

    Spark Plug
    Ryobi 875r Trimmer: something simple like replacing the spark plug has become a major pain. I finally found a Champion RDZ19H, but this plug is a lot smaller then the factory plug. Is there another plug similar to the factory?
  • Posted by jenefersachs on May 20th, 2008 at 10:35pm

    removal of head
    I need to remove the head of my trimmer could you either tell me how or where to look to do this please?
  • Posted by llp50 on May 11th, 2008 at 11:04pm

    FUEL
    HOW TO REPLACE THE FUEL LINE
  • Posted by nickroemer on May 4th, 2008 at 9:37pm

    trimmer line
    how do i put line in ?
  • Posted by cyberibe on Apr 28th, 2008 at 6:25pm

    Fuel line replaxement
    Fuel line cracked. Got replacement hose, but in replacing connections on the primer bulb, both lines broke off. Now I'm not sure which line goes where. Cross my fingers and attempted. Seems right but fuel doesn't prime either way or stay flowing.
  • Posted by rweinhorn on Apr 27th, 2008 at 3:29pm

    Spark plug
    I need the Gap for plug
  • Posted by rweinhorn on Apr 27th, 2008 at 3:29pm

    Spark plug
    I need the Gap for plug
  • Posted by toni on Apr 22nd, 2008 at 5:13am

    can't read the manual
    hi, why can't i see and read the manuals held in my filing cabinet ?
  • Posted by qualitypei on Apr 10th, 2008 at 4:43pm

    motor will hardly turn-over
    With spark plug out it turns over easy,however with it in the head you can hardly pull it. Is rod or crank bent?
  • Posted by mhiebsch on Apr 6th, 2008 at 3:37pm

    spools
    how to doal feed spool

Home Efficiency Audit
The Home Depot's Home Efficiency Audit delves into all facets of energy and water usage throughout your home, helping you to discover the most efficient means to save money and energy. The audit will help you find ways to reduce your energy bills, protect the environment, and transform your house into a more comfortable, sustainable home.

Ask OwnerIQ Members for Help With A Problem

Let the OwnerIQ Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the OwnerIQ membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press