Login

RSS What is this?

Are You an Employee of Husky?

Let us know you're looking at the manuals we've found and help us provide better support to your customers.

Email address:
Help Requests

Husky Gas Pressure Washer




Can You Help With These Problems?

  • Posted by tammielynch on Sep 4th, 2008 at 9:27pm

    Pump outlet
    pressure spring broke on pump outlet side (to adjust how much pressure)
  • Posted by rfrudolph on Sep 2nd, 2008 at 1:16pm

    Also need an owner's manual
    Is there a website link to the owner's manual somewhere? I bought unit reconditioned and it did not come with a manual.
  • Posted by steve on Aug 30th, 2008 at 9:53pm

    Owners Manual
    If anyone has one, Please email it to me at

    steve@omegabuilders.com

    Thanks, Steve
  • Posted by davidcraine on Aug 29th, 2008 at 3:30pm

    parts
    I am trying to order a replacement part for my washer. The part # is # 678152001 which is the Detergent / Black nozzle.
  • Posted by shodges53 on Aug 29th, 2008 at 3:17pm

    registratiobn
    How do I register this product
  • Posted by joanlandry on Aug 27th, 2008 at 4:32pm

    Gasket
    The gasket is shot and I can't find a new one.
  • Posted by dan on Aug 23rd, 2008 at 8:54pm

    Need to replace water intake part
    The water intake on my Husky HU80522 gas pressure washer came out and got lost. It does not show up on the parts list. Any help would be appreciated.
  • Posted by tjtrotter1953 on Aug 18th, 2008 at 12:29pm

    cleaning fluid won't pump
    put in right head, uesd this machine several times, won't pull the fluid
  • Posted by batwolfson on Aug 16th, 2008 at 12:18pm

    Water Pump
    After replacing water intake/outake stems, and making the mistake of removing pump from motor shaft, then problems w/attachment, water now flows out of detergent intake on pump
  • Posted by kirch on Aug 12th, 2008 at 5:26pm

    Need parts list
    Part was broken. Needs parts list to order new part
  • Posted by anncori on Aug 2nd, 2008 at 8:55pm

    problem
    water is leaking from bottom of washer
  • Posted by anncori on Aug 2nd, 2008 at 8:49pm

    problem
    water leaking from bottom
  • Posted by sam on Jul 29th, 2008 at 1:45pm

    powerwasher
    no manual
  • Posted by cjlopez on Jul 28th, 2008 at 4:57pm

    manual
    store use
  • Posted by leonalisa68 on Jul 24th, 2008 at 5:48pm

    missing manual
    missing manual
  • Posted by fiblack52 on Jul 20th, 2008 at 9:49am

    Need manual
    Can't get soap to feed.
  • Posted by madsarver1 on Jul 20th, 2008 at 9:33am

    can this product over heat?
    I was using this Pressure Washer and after a few minutes the engine just stopped. It would start only after serveral minutes and would stop again. Can this engine over heat or is it something else
  • Posted by gsaba1217 on Jul 12th, 2008 at 6:50pm

    Need assistance
    My off switch while the washer is on won't shut down,till gas runs out.Hope you could provide some input.Thank You.
  • Posted by rebson on Jul 12th, 2008 at 9:48am

    Worthless manual
    I have a new husky hu80931 with low water pressure and water shoots out a hole next to the detergent connection. The little manual does not address this. Should I plug this hole? The manual says that there is a thermal relief valve but it does not show where it is. Also there is a plastic fitting on…
  • Posted by mike.ness on Jun 26th, 2008 at 3:33pm

    hose
    I dropped the Trigger Handle and broke the hose connection. Where do I order a new hose?
  • Posted by ddavis on Jun 23rd, 2008 at 12:15pm

    Pump repair
    what type of pump (Manufacture) is on the HU80522. I just need to order washers and parts for pump?
  • Posted by motorhead427 on Jun 9th, 2008 at 4:55pm

    leaking pump
    half the water is blowing out the pump by the head,I can't locate a place to by a pump seal kit,I had the head off and it just looks like it would need new o-rings and seals,any help would be greatly appreciated, the unit is only 2 years old
  • Posted by fsl65 on Jun 7th, 2008 at 9:38pm

    stalls
    stalls when washer trigger is not pressed
  • Posted by beadonor on May 31st, 2008 at 9:52pm

    need parts
    Need replacement pipe that screws on to Pressure Hose connected to pump. not on parts list???
  • Posted by www.shoot4july2008 on May 27th, 2008 at 9:34am

    Pump oil
    Pump Maintenance:

    The owner's manual recommends changing the PUMP OIL every 100 hrs., but it doesn't advise how much oil to replace it with. Can you advise of the manufacturer's recommendations. Thanks.
  • Posted by jjtcrossan on May 23rd, 2008 at 12:38pm

    PREEURE wASHER
    i NEED THE MANUAL FOR THIS pRESSURE wASHER . hOW CAN i GET A DOWN LOAD FOR IT
  • Posted by mcwolf8 on May 21st, 2008 at 8:20pm

    Volume in GPM
    I am considering this Pressure washer but cannot find info on the volume,ie...Gallons per minute it will deliver...THe PSI sounds great. Lance
  • Posted by bluefin226 on May 6th, 2008 at 12:11pm

    How To Operate
    I don't have the manual and I don't know how to hook up the hoses and operate it.
  • Posted by ealey579 on Apr 29th, 2008 at 5:06pm

    handle
    how to get new handle
  • Posted by rnco91 on Apr 18th, 2008 at 11:26am

    starting
    machine wont start

Ask OwnerIQ Members for Help With A Problem

Let the OwnerIQ Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the OwnerIQ membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press