-
Posted by kim.lyng on Oct 13th, 2008 at 9:33pm
belt replacement
I need to replace the belt that runs from the engine to the mower deck. I just need information regarding its proper orientation. Thanks.
-
Posted by blue2tone on Oct 13th, 2008 at 3:04pm
Drive Lever Adjustment
How do you adjust the left and right drive levers so they are equal when driving straight?
Alternatively, can you give a link to the repair manual?
Thanks
-
Posted by cia on Oct 6th, 2008 at 7:37pm
routing deck belt
routing deck drive belt
-
Posted by adatree on Sep 30th, 2008 at 6:48pm
Drive chain tensioner
I have tried to keep the chain on with no luck. I have changed the threaded rod 3 times. I've heard that this model has a modification but unable to find it. This mower has worked great except for the tensioner. The dealer told me that this model had a bad design and unable to tell me how to correct…
-
Posted by tea3803 on Sep 30th, 2008 at 6:44pm
Mysterious Lugnut loosening
Ok the nuts were loosened and before I noticed the problem the rim, lug bolts and lugnuts were ruined. I can find th epart number for the rim and nuts but no luck on the bolts.
Help please
Tom
-
Posted by r_gruebel on Sep 29th, 2008 at 4:23pm
repair manual
belts
-
Posted by strongstuff2 on Sep 29th, 2008 at 4:13pm
2002 ztr 42"
how do you get it in neutral so you can push it to the road. it is in the field where I can't get to it.
-
Posted by sdochertyk25 on Sep 29th, 2008 at 2:25pm
wiring diagram
Need wiring diagram for a model ZTR 542.
-
Posted by lweldon1 on Sep 25th, 2008 at 9:33pm
control handles sensitivity
mower jerky
doesn't control smoothly
-
Posted by pgyarger on Sep 21st, 2008 at 4:28pm
Need Service and Repair Manual
Want to Repair and work on my mower.
-
Posted by bmoan on Sep 21st, 2008 at 1:40pm
parking brake
Parking brake
-
Posted by sidmccain on Sep 21st, 2008 at 11:26am
Wireing Diagram
Mower will noe start one of the safety switches is out.
-
Posted by aj3467 on Sep 18th, 2008 at 9:13am
belts
belt came off, no diagram in manual on how to put back on.
-
Posted by nelbel on Sep 8th, 2008 at 12:33pm
Rear Tri-axle
I need a diagram of how it goes together.
-
Posted by baileyta2 on Sep 4th, 2008 at 5:34pm
belt replacement
I need a diagram of the deck when fully assembled. Belt came off and some parts came loose but i am not sure how it goes back together.
-
Posted by mafrazie973 on Sep 2nd, 2008 at 10:10am
Fuel problem
Engine stops running when fuel tanks only down by 20%.
-
Posted by gorapmo on Aug 29th, 2008 at 9:31pm
starter
I'm replacing the started and it seems that the teeth from starter and motor set too close when they engage. Should a washer be placed behind start to correct?
-
Posted by golandscapes on Aug 26th, 2008 at 1:24pm
hydraulics
service change fluid
-
Posted by bam on Aug 25th, 2008 at 7:47pm
belt access
need to know how to take top off mower to access belts
-
Posted by resiclamdiver on Aug 21st, 2008 at 3:10pm
429 cone adjustment
I need a repair manual for my 429 Dixon ZTR mower. TIA
-
Posted by washingtonkenneth on Aug 19th, 2008 at 9:41am
troubleshoot
how to install a selenoid switch?
-
Posted by sarge on Aug 18th, 2008 at 11:15am
owners manual
mower won't start or even turn over and we have no manual. also there is also a wire hanging under the mower that seems to go nowhere so would also like the schematic of the electrical system thank you
-
Posted by variety on Aug 16th, 2008 at 1:56am
owner's manual
Need owner's manual for the DM-30 Dixon ztr mower. Thank you.
-
Posted by ceevester on Aug 15th, 2008 at 10:47am
Dixon 4423 won't start with key
My 4423 won't start with the key. I have checked the ignition switch, blade switch, brake switch, seat switch, and starter solenoid. All test okay. Anyone have any idea what the problem could be?...it will start if I "hot wire" it with the key on. (jumper wire from battery directly to starter.)
-
Posted by ebreilly on Aug 15th, 2008 at 10:42am
8025 circut breaker
My circut breaker is popping out about every 5 or 10 minutes. Anybody have any ideas or expierence with this?
-
Posted by jakeg_43 on Aug 14th, 2008 at 9:32pm
drive cone replacement
1 cone is destroyed
-
Posted by rajemmott on Aug 14th, 2008 at 7:38pm
changing blades
are nuts on blades clockwise or cclockwise
thanks
-
Posted by dvtexx on Aug 13th, 2008 at 4:03pm
ajustment
need help with hand controls, turning,stoping .ineed to know how to time my hand controls
-
Posted by cmckee on Aug 9th, 2008 at 11:27pm
steering adjustment
i need to find out how to adjust the steering on my dixon 3303 mdel 1 handel goes further than the other and it moves very slow
-
Posted by cmckee on Aug 6th, 2008 at 7:02pm
mod3303
how do adjust the linkage that makes the mower go forward
-
Posted by wmcltd on Aug 3rd, 2008 at 12:45am
mower
not working
-
Posted by rmarquardt1 on Jul 31st, 2008 at 7:35pm
Adjust turning controls
How to? Adjust turning controls to provide even smooth turns
-
Posted by bonnie_melton on Jul 31st, 2008 at 6:24pm
Manual
none
-
Posted by edwards833 on Jul 27th, 2008 at 2:04pm
dixon
steering cones
-
Posted by michaeldecker on Jul 27th, 2008 at 8:04am
manual needed
I cannot get ahold of the dealer I bought mower from. I do not know for sure the model number. Mower will not start, it is probably an interlock problem.
-
Posted by trogers on Jul 19th, 2008 at 12:35am
hydrostat transmission
replace hydrostat transmission cooling fan
-
Posted by jdkdkdcd on Jul 16th, 2008 at 10:07pm
Replacing cones
What and how to remove parts to enable me to remove and replace cones on my 400002 older dixon zero turn mower
-
Posted by jdkdkdcd on Jul 16th, 2008 at 10:00pm
Replacing the turning cones
What to remove to replace the cones
-
Posted by tlbugh on May 15th, 2008 at 12:26pm
need a diagram for belts
need to no how to put the belts on right
-
Posted by pralle on Apr 25th, 2008 at 5:02pm
blower/catcher belt position
belt placement on mower deck and bolwer
-
Posted by ajadaca on Apr 9th, 2008 at 7:14pm
owners manual for ztr 4421
cannot find a manual for this mower, can u help???