-
Posted by rocco6196 on Sep 5th, 2008 at 2:26pm
wont start
tring to locate fuel line cant find it
-
Posted by glenandtan on Sep 4th, 2008 at 9:28pm
chain oiler
saw is not oliing chain where is the oil pump
-
Posted by tkinkead32 on Sep 2nd, 2008 at 9:55pm
manual
need parts
-
Posted by zeiglerm2 on Aug 31st, 2008 at 3:18pm
Fuel line replacement
What is the routing of fuel lines from tank to primer pump to carb? There are 2 sizes of fuel line.
-
Posted by painter865309 on Aug 31st, 2008 at 2:02pm
idle
i got this saw from a friend. it didn't even run when i got it. now it starts and revs good for about 5 seconds then bog out. i replaced the gas lines, checked the plug, the muffler and the breather. any help would be great
-
Posted by williams52008 on Aug 28th, 2008 at 9:29pm
chain saw getting to much gas
Chain saw is flooding it self out. Where is the fuel adjustment
-
Posted by cweitz on Aug 27th, 2008 at 11:25am
gas line
Gas line broke in pieces, & don't remenber how lines went. 2 connectors on primer, 2 on carb. & 2 holes going down to gas tank, also 2 differant size line.
-
Posted by letito on Aug 26th, 2008 at 6:24pm
chainsaw
how to get it started
-
Posted by tadeoperez on Aug 25th, 2008 at 12:10am
leaking oil
ran saw w/o oil. Starts great , but will not oil the chain and all oil leaks out? Blown gasket?
-
Posted by rstewart24 on Aug 21st, 2008 at 7:52pm
owners manual
chain tightening assembly
-
Posted by boutique5 on Aug 19th, 2008 at 3:20pm
fuel line
I need fuel line info to
repair my craftsman gasoline chain saw
2.6 cu.in/42cc 2 -cycle
-
Posted by hbrob120 on Aug 19th, 2008 at 2:04pm
Operating Manual
Need a operating manual
-
Posted by sstarpro on Aug 18th, 2008 at 1:13pm
tightening chain
I do not have a manual with my saw and I need to know how to tighten the chain.
-
Posted by captain0612 on Aug 17th, 2008 at 1:36pm
gas/oil mixture
I bought this Craftsman chainsaw from Sears on Clearance Sale, but it didn't include the User's Manual. Can anyone tell what the proper gas-to-2 cycle oil mixture is? I don't want to fry the engine using an improper mixture. Thanks.
-
Posted by tarfanoa on Aug 17th, 2008 at 9:30am
fuel hose
need to see how the fuel lines are routed for this model.lines were all in shreds inside the fuel tank.
-
Posted by aanderton on Aug 15th, 2008 at 11:20pm
diagram
need diagram of chainsaw motor/will not crank
-
Posted by rich.calogero on Aug 14th, 2008 at 11:22am
Manual
saw will start but stalls when throttle is engaged
-
Posted by a_dybvig on Aug 12th, 2008 at 6:10pm
chain oil leak
chain oil leaks all over the place
-
Posted by dripley910 on Aug 11th, 2008 at 8:53pm
manual
18in bar
42cc engine
-
Posted by crazy_gramma2003 on Aug 10th, 2008 at 8:14pm
primer bulb
saw worked great until i had to put more fuel in, now when i press primer it won't pull the fuel up???
-
Posted by tely on Aug 10th, 2008 at 1:35pm
Chain will not move
The chain came loose. After I put it back on, the chain does not move. When Itake the cobver off, I can turn the gear manually.
-
Posted by b2slonebh on Aug 8th, 2008 at 11:25am
oiling
chain not oiling
-
Posted by vastatefan85 on Aug 5th, 2008 at 2:26pm
Owners Manual
Looking for owners manual
-
Posted by twoolums on Aug 2nd, 2008 at 1:33pm
fuel mixture
will idle but won't run under acceleration
-
Posted by sonduenes on Aug 1st, 2008 at 6:22pm
james
will not start. New spark plug and everything seems OK. just having problems starting.
-
Posted by sean on Jul 30th, 2008 at 8:20am
not working
my chain saw is not putting out bar oil for the chain? and could you send me a manuel for it as well for ez adiust bar pull lite extreme 358.350670 to sean@dvta.com
-
Posted by latentprint on Jul 28th, 2008 at 9:43pm
gasline
how to reconnect the three lines
-
Posted by 24tdr on Jul 27th, 2008 at 10:40pm
Vent tube assembly
What parts goes on the vent tube assy and where are they located. Think there is a vent plug, check valve but do they go inside of gass tank, or above on tube.
-
Posted by 24tdr on Jul 27th, 2008 at 9:41pm
Vent tube & parts attached to it..
vent tube broke. How are the parts install on the tube. What parts goes into gas tank & on tube standing up out of gas tank..?
-
Posted by dmdxn4 on Jul 26th, 2008 at 6:53pm
manual
Trying to diagnose a running problem; it will start, and idle for about 20 sec., and will die if the throttle is opened up.
-
Posted by vbutcher183 on Jul 25th, 2008 at 10:17pm
tune up
hard to start
-
Posted by avercioea on Jul 24th, 2008 at 9:39pm
parts
I need the spring of the cran
-
Posted by gcarter_70 on Jul 21st, 2008 at 12:50pm
fuel line
diagram of fuel line
-
Posted by drivesouth2535 on Jul 14th, 2008 at 9:31pm
chainsaw
18" 40cc
-
Posted by tkpappas on Jul 12th, 2008 at 5:03pm
gas and breather lines routes
old lines fell off in pieces, not sure which pieces (rubber breather end piece and inline gold piece go) and to which hose and fitting in carbs. Thank You.
-
Posted by rbirwin on May 11th, 2008 at 8:16pm
Need Owner's Manual
Could someone please help me locate a manual for this chainsaw?
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!
Mobile Phones are Your Next Tour Guide
Keeping Hot Electronics Cool
Quick Steps to a Long-Lasting Paint Job: DIY Guide
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.