-
Posted by boog1e on Aug 14th, 2009 at 4:56pm
countax mower 30h
fault code "c" please
-
Posted by sidgrover on May 1st, 2009 at 7:12am
countax mower clutch removal
i am trying to remove the magnetic clutch from my briggs and stratton engine
ihave taken off the flywheel bolt and the whole clutch drops a few millimeters then is stopped from coming off by a retaining stud. how do i get the clutch past this stud? regards sid
-
Posted by anthony.ansell on Apr 22nd, 2009 at 8:43am
Countax C500H
Machine will now not start via key with a fully charged battery and had not previously been charging it's battery. Could these faults be related ?
-
Posted by adrian on Dec 27th, 2008 at 5:21pm
Manual for cutter deck
Need drawing showing how the bearing assembly for the cutters goes together. Cannot get it apart!
-
Posted by deinmond on Nov 9th, 2008 at 6:14pm
Error Codes
Please anyone can you tell me what the diagnostic error codes mean, mines flashing "5" any i havent a clue what it means, thanks Rich
-
Posted by jim.clark01 on Oct 23rd, 2008 at 10:35am
Belt Change
changeing drive belt on es 400
-
Posted by karel.krista on Oct 19th, 2008 at 11:53am
the tractor dows not stop when the pedal is in neutral position
Hello,
After the tractor was serviced by the local dealer, it now takes a long time before it stops, when the pedal is released.
I would like to consult the service manual to find out what is the correct stopping distance. Would anyone know where I could find this information?
Thanks.
Kare…
-
Posted by markandhelenrawson on Sep 28th, 2008 at 9:27am
drive belt
what is the correct belt size for drive belt
-
Posted by rogergayle on Sep 27th, 2008 at 10:10pm
pto drive belt change
removal of electric clutch & pulleys to change pto drive belt, bolt on underside will not budge
-
Posted by theeddys2 on Sep 14th, 2008 at 10:42am
Deck drive belt configuration
I would like the belt drive configuration on the K15 38in cut
-
Posted by michelle69bennett on Sep 10th, 2008 at 8:30am
replace belt
how do you replace a belt?
-
Posted by mike on Sep 6th, 2008 at 9:19am
Wont start
Spluttered to a halt. Tyrned engine over but not engaging, then wont turn over at all.
Battery fully charged.
Any ideas please ?
-
Posted by kingfisher42 on Sep 3rd, 2008 at 3:12pm
electric clutch
ran out of petrol refilled started mower but electric clutch would not cut in
-
Posted by phil_reeves on Sep 2nd, 2008 at 9:30am
C38H, engine cut out and deck not engaging
Appreciate any help on the following please...
Have a c38h mower, and the battery slowly died which in the end didn't hold enough charge to engage the belt and could only be started by a booster. Replaced the battery, and now engine starts perfectly, but now engine stops as soon as take foot off th…
-
Posted by ian on Aug 27th, 2008 at 6:03pm
User Manual
Does anyone have a manual for this mower
-
Posted by micktrac on Aug 18th, 2008 at 4:14pm
Wanted, Wiring diagram
Battery will not hold charge, suspect charging circuit fault
-
Posted by alanmilton on Aug 16th, 2008 at 8:43am
Cutters
No power to cutters when switch turned on. Don't think it is the switch? Any idea. Where can I get a manual? Cheers. Alan
-
Posted by alanbensport on Aug 10th, 2008 at 1:16pm
Carburettorm. Solid Wire control connections
I need to know how the 2 steel wire connections are made where the carburettor controls are, just along behind the carburettor rear inlet and side. These little wire connections have been removed and I do not know how they should be re- connected.
Thanks, Alan.
-
Posted by stuarthorsman on Jul 21st, 2008 at 6:50am
MANUAL
WE HAVE THREE PEDALS AND DONT KNOW HOW TO WORK THEM.
WE WANT TO KNOW WHICH IS THE BRAKE AND WHICH IS THE THROTTLE
-
Posted by cayers on Jul 15th, 2008 at 10:18am
User Manual
Does anyone have the user / operator manual for the C300H Countax Lawn Tractor?
-
Posted by sj on May 11th, 2008 at 6:53am
battery
How do I remove the battery in order to replace it?
-
Posted by jillm83 on Apr 17th, 2008 at 7:55am
Cutting Deck
I need a reassemble diagram of the pulleys
-
Posted by chrisballtwin1 on Apr 5th, 2008 at 6:21am
Countax A20, A50
Need service manual? Error codes?