Login

RSS What is this?
Help Requests

Hot Tub




Can You Help With These Problems?

  • Posted by ljwhitely on Oct 7th, 2008 at 7:47pm

    manual
    owners manual
  • Posted by nwstmnstr on Oct 7th, 2008 at 1:17pm

    pump/motor 3 HP
    need to buy replacement? cost?
  • Posted by lmb3 on Oct 6th, 2008 at 5:59pm

    looking for owner manual
    jacuzzi 8200000 owners manual needed please e-mail me lmb3@windstream.net of any information founded
  • Posted by george_01 on Oct 5th, 2008 at 8:01pm

    NEED OWNERS MANUAL
    OWNERS MANUAL
  • Posted by tklatkz on Oct 4th, 2008 at 5:21pm

    Tri-zone Selector stuck
    Reward Spa 2005 purchased used has a stuck trizone valve. Is a special tool required to remove on disassble? Ideas for solving the problem? TK
  • Posted by tonimorningstar on Oct 2nd, 2008 at 10:38am

    DRAIN PLUG WILL NOT FIT
    MY DRAIN PLUG WILL NOT FIT NOW, PLEASE SEND ME A DIAGRAM OF HOW IT SHOULD LOOK OR A MANUAL FOR AN AMIGA N890
  • Posted by menjay on Oct 1st, 2008 at 2:07pm

    OH
    My hot tub flashes OH on the panel and completely quits running...any ideas on what this may be?
  • Posted by maddisonleigh on Oct 1st, 2008 at 9:19am

    help with hot tub
    i am needing info or manual for caldera 9800 hot tub
  • Posted by sixsal3 on Sep 30th, 2008 at 11:58pm

    controls
    trying to figure out how all

    the controls work for the

    timer, heat, and what is the

    best way to heat the spa.
  • Posted by aldur01 on Sep 29th, 2008 at 11:18pm

    wont change modes
    I think the guy i got it from wired it wrong it wont change modes only has one mode full on i need a wiring diagram
  • Posted by draven1979 on Sep 28th, 2008 at 3:55pm

    need parts
    i'm having problems finding relpacement parts for this spa. will u please email me a link or something? thanks for your time.
  • Posted by stevepuckett on Sep 28th, 2008 at 1:44pm

    hEATER
    Looking for owners manual
  • Posted by csstauffer on Sep 27th, 2008 at 6:51pm

    manuals
    tubbs about 5 yrs old
  • Posted by amy.a.walker on Sep 27th, 2008 at 3:49pm

    Heating
    How long does it take for the water to heat once you fill it? And, has anyone located the manual?
  • Posted by r_foupht on Sep 27th, 2008 at 2:00pm

    replacing jets
    the jets are sticking and have broken on the smaller jets where can i find replacement parts?
  • Posted by wilfredoel on Sep 27th, 2008 at 1:01pm

    old spa( symphony spa system
    I have old spa symphony system the system don't work

    any more i need some address in miami, my name es wilfredo elias i yes star comunnicated with you my tel # is305-227-2086
  • Posted by johnp on Sep 27th, 2008 at 12:03pm

    help with pump 2
    Clean the hot tub added new water, started it the first pump is working. the second pump keeps spurting, primed it and it still is doing same thing what should I do now.
  • Posted by billrich96 on Sep 25th, 2008 at 2:34pm

    O-rings
    i am looking for someone that i can order o-rings for the jacuzzi i have: charisma judge lx 1500. i need the ones for the top of the jacuzzi: selector valve (i think they are a size 1 1/2)



    thanks for the help in advanced
  • Posted by patriciaiowa on Sep 24th, 2008 at 2:16pm

    Part Needed
    Filter Housing Door
  • Posted by gremlingreen1 on Sep 24th, 2008 at 2:01pm

    union assembly
    I am looking for a union assy 1 and a half inch with threads inside
  • Posted by jtroam on Sep 23rd, 2008 at 2:13pm

    problem
    The hot tub is blowing the breaker inside the house. It will run for about 8 minutes before this happens.
  • Posted by jakeandpippa on Sep 22nd, 2008 at 2:04pm

    owners manual
    i would like to have a look at the maunal
  • Posted by gberkman on Sep 22nd, 2008 at 10:38am

    flow
    lcd screen sometimes flashes flo
  • Posted by gberkman on Sep 22nd, 2008 at 10:38am

    flow
    lcd screen sometimes flashes flo
  • Posted by choar on Sep 21st, 2008 at 8:38pm

    Code on Computer
    I don't know the model of my hot tub and an FL code keeps flashing with a too low temp. Water won't warm up.
  • Posted by kracherc on Sep 20th, 2008 at 3:07pm

    manual
    maintenance
  • Posted by hltynes on Sep 19th, 2008 at 6:23pm

    Pump isn't working
    Motor shaft turns but water is not pumping or circulating. It was working fine until after it was drained and refilled.
  • Posted by gswlker on Sep 19th, 2008 at 4:50pm

    Hot tub shut down
    Sundance hydotherapy spa, thru a breaker, light is on the panel box marked not for service. Digital readout on the display has lines that blinks but the spa won't start. What could it be, the filter is new.
  • Posted by lyn28732 on Sep 17th, 2008 at 8:09pm

    need part
    heating element has burnt spot on it and need replacement part
  • Posted by sixsal3 on Sep 17th, 2008 at 7:02pm

    ser#3724
    Have to replace some tubing

    and will have to refill with

    foam. Mice like the taste of

    the tubing.
  • Posted by scatter888 on Sep 16th, 2008 at 11:14am

    doesn't work
    when you turn it on, it pumps five times and then stops. How does one check to see if the circuit board is defective?
  • Posted by jasonswayne on Sep 15th, 2008 at 8:06pm

    overheating
    refilled tub and stops at 93 degrees says overheat, waited 10 hrs and did it again saying dry. water level is good. was told to loosen coupling to realease air. do u know witch coupling?
  • Posted by jimkenny134 on Sep 15th, 2008 at 7:34pm

    motor trouble
    have the imsb73920 and the display is showing F2 and i think the circulating pump is not working
  • Posted by garnethare on Sep 14th, 2008 at 10:48pm

    WON'T RUN
    PUMP SEEMS TO BE GETTING POWER BUT WON'T START
  • Posted by hayloft2001 on Sep 12th, 2008 at 11:33pm

    filter
    which filter do I need?
  • Posted by jcbonneau1 on Sep 12th, 2008 at 11:28pm

    filter cap
    bought a used hot tub, found the filter cap missing. Help me!!
  • Posted by paul.lawrence30 on Sep 12th, 2008 at 11:56am

    error edt
    blowers not working
  • Posted by shaylaaax7 on Sep 9th, 2008 at 7:25pm

    settings
    need to know how to use display what settings to keep temp up
  • Posted by rdd5466 on Sep 9th, 2008 at 2:48pm

    vita hot tub
    need manual for vita L-50 hot tub
  • Posted by bwatkins62 on Sep 9th, 2008 at 12:44pm

    Runs constantly
    My tub does not cycle down and runs constantly in all modes
  • Posted by curshell on Sep 8th, 2008 at 1:50pm

    procamming
    lost manual errer codes
  • Posted by mwilkosz on Sep 8th, 2008 at 11:27am

    tripping of GFR
    when hot tub is heating runs for 30 sec. and then pops the circuit breaker
  • Posted by lurahines on Sep 7th, 2008 at 4:23pm

    heating element burned out
    My heating element has burned out. It is manufactured by Balboa. How do I get a replacement?
  • Posted by glaverdiere on Sep 7th, 2008 at 3:14pm

    manual for Superior Spas
    I need the manual for this spa. The retailer I purchased it from several years ago is no longer in business. Thank you.
  • Posted by owneriq.braggfamily on Sep 6th, 2008 at 9:13pm

    Seeking repair guidance.
    Motor drives an impeller - need to remove impeller to fix seal between impeller and motor. Don't know how to remove impeller. Please help.
  • Posted by espringe on Sep 6th, 2008 at 6:19pm

    hot tube
    I would like to know if they are knobs for the controls.I got my started then i hit the button to see if it would turn off it did now it will not turn back on.
  • Posted by dfwoodsjr on Sep 6th, 2008 at 3:37pm

    owners manual
    looking for an owners manual
  • Posted by rudyk_51 on Sep 3rd, 2008 at 10:43pm

    Manual
    I am looking for a manual, can you help please?
  • Posted by trojro on Sep 1st, 2008 at 10:51am

    Replacing worn jets
    Need info on where to order correct jet for replacement
  • Posted by laranake on Aug 31st, 2008 at 4:41am

    Replacement of Venturer control
    Air adjustment turn screw broken replacement got now need to replace anyone have any quick fit advice as tub part part below ground level with access manhole to control door
  • Posted by jerryengine9nine on Aug 29th, 2008 at 4:08pm

    parts
    replacement parts
  • Posted by rzamp723 on Aug 28th, 2008 at 4:54pm

    need control panel and owners manual
    need new control panel
  • Posted by drouin701 on Aug 26th, 2008 at 11:17pm

    filter
    We would like to purchase a second filter for our LD-15 Series Spa but we can't find a dealer here in Lodi, CA. Can you help us?
  • Posted by bcrb588 on Aug 25th, 2008 at 1:36pm

    Filters
    Where can I purchase filters for proform orbit hydrotherapy spa
  • Posted by dunnred4 on Aug 24th, 2008 at 1:05pm

    filters
    i don't know how to purchase a new filter
  • Posted by presgraves on Aug 23rd, 2008 at 9:15pm

    replacement jets
    the place i got my tub does not carry my parts any longer so where can i order them please help
  • Posted by w.coll on Aug 22nd, 2008 at 8:39pm

    will not warm water
    have a model 7700000 that will not warm the water. Is there a separate heating element or is it a pump unit?
  • Posted by msfletch on Aug 21st, 2008 at 1:33am

    Wiring
    How to wire a unit? Looking for a diagram.
  • Posted by dbjones01 on Aug 20th, 2008 at 5:48pm

    Need the same manual
    serial #1061134
  • Posted by debbie.dd26 on Aug 19th, 2008 at 2:50pm

    looking for manual
    I am looking for a manual for my hot tub
  • Posted by c_landofoz on Aug 19th, 2008 at 2:40pm

    control panel diagram
    just moved in, spa already there,but NO manual ect for spa. Wires are unhooked and don't know where the should be?
  • Posted by fierogtchuck on Aug 19th, 2008 at 12:58pm

    need a manual
    need owners manual
  • Posted by lisamoats1 on Aug 19th, 2008 at 12:23pm

    1998 Reward
    Hello



    Looking for an owners manual for a 1998 Marquis Reward Hot Tub THanks
  • Posted by todde1 on Aug 18th, 2008 at 9:37pm

    manual
    looking for manual
  • Posted by sultlin on Aug 16th, 2008 at 5:55pm

    eura whirlpool bath
    leaking from back two jets
  • Posted by djhughes514 on Aug 15th, 2008 at 9:16pm

    Jets
    Im need to replace two large jets and one small.

    Where can I find them?
  • Posted by keith.scribner on Aug 15th, 2008 at 5:36pm

    code oh
    code oh and fl displayed
  • Posted by mferrusi on Aug 15th, 2008 at 4:19pm

    OPERATING INSTRUCTIONS
    KOHLER JACUZZI
  • Posted by burma613 on Aug 15th, 2008 at 1:52pm

    user manual with diagrams
    need user manual
  • Posted by burma613 on Aug 15th, 2008 at 1:48pm

    user manual with diagrams
    need user manual
  • Posted by lucky_girl20-08 on Aug 13th, 2008 at 5:08pm

    manual
    Need to find manual so can start to use hottub.
  • Posted by rkolinske on Aug 12th, 2008 at 4:54pm

    pumps run all the time
    the pumps are supposed to shut off and run every 12 hours when the tub is not is use, they are running all the time. what can I do to fix the problem?
  • Posted by tomatbob on Aug 11th, 2008 at 5:06pm

    owners manual
    need an owner's manual
  • Posted by marnette1956 on Aug 9th, 2008 at 8:07pm

    FL 1 is flashing
    What to do? It flashes for awhile and then it goes to --=-- on the panel.
  • Posted by plumbart on Aug 9th, 2008 at 5:51pm

    weak
    weak or slow pulsating flow at adjustable thera jets. air control valve has no effect on air flow . pump sees to be surging. can i get a piping diaghram? what is small clear hose for?
  • Posted by beckylarimore on Aug 7th, 2008 at 6:02pm

    jets not working
    pumps comes on but the jets don't
  • Posted by dfeldhahn on Aug 3rd, 2008 at 10:14pm

    OWNERS MANUAL
    OWNERS MANUAL
  • Posted by djt6795 on Aug 3rd, 2008 at 2:53pm

    find owners manual
    owners manual
  • Posted by alain on Aug 2nd, 2008 at 8:35pm

    control pad showing flo
    control pad showing flo
  • Posted by pimpdiddy121 on Aug 2nd, 2008 at 1:25pm

    HELP!!!!
    i jus got a jacuzzi whirlpool bath from someone down the road an they said awhile back the heater core went out of it an they used it afterwards an it won't heat up. an they said when you change the tempature to hot it won't always turn hot it might be cold an vise versa
  • Posted by billperry on Aug 1st, 2008 at 6:57pm

    manual
    draining hot tub proceedure
  • Posted by robncarey on Jul 31st, 2008 at 9:21pm

    1986 coleman spa manual
    Looking for manual.
  • Posted by odd1959 on Jul 30th, 2008 at 11:31pm

    Leak -
    leak at the jet regulating valve (?) not exactly sure the name of the part
  • Posted by imatylla3 on Jul 29th, 2008 at 12:21pm

    Hot tub display reads "FLO"
    For some reason, my hot tub has started displaying the words "FLO" on the display where the temperature usually reads. The jets are flowing but those letters show up.



    What does this mean? The jets don't seem to turn off either.



    I have since turned the hot tub off completely until I get this re…
  • Posted by jodell on Jul 28th, 2008 at 9:29pm

    how do I find the model number
    Hot tub Dealer went out of business 3 seats and lounge

    Premium Bought in Auburn, CA in 2003 might be j-130 series Can take picture if you like
  • Posted by justmepfk on Jul 26th, 2008 at 3:59pm

    MANUAL
    NO MANUAL NO POWER JUST A CLICKING NOISE PERHAPS THE MOTOR SEIZED
  • Posted by tuntalkr on Jul 24th, 2008 at 6:13pm

    hot tub problem
    tub has error code FL fails to turn on



    Can't find phone number for the service company in bloomington Il.
  • Posted by rgh181 on Jul 23rd, 2008 at 4:25pm

    over heating
    over heating
  • Posted by diondmm on Jul 22nd, 2008 at 4:34pm

    renew portable spa
    i dont have a book
  • Posted by tjreid1974 on Jul 21st, 2008 at 6:47pm

    Hot tub cover
    Can you please give me the exact measurements to the Image Renew 739 Hot Tub cover. I need to order a new one.
  • Posted by provfirescott on Jul 21st, 2008 at 4:15pm

    Hot Tub died
    I own a ProForm hot tub model # 831.210051

    Serial # Jo4111508



    It just stopped working one day.I am pretty sure its the comuter ascpect of it and was wondering where I can purchase a new computer or can I repalce it with a different tyoe altogether

    Thanks,

    Scott
  • Posted by ldenzler on Jul 20th, 2008 at 4:44pm

    Heater not shutting off
    We replaced the control box cause it was tripping the breaker cause it wouldn't shut off. Now the new one is doing the same. Can somebody advise us what to try now?
  • Posted by searig2000 on Jul 19th, 2008 at 1:53pm

    need parts
    I need the console part# 16 in the owners manual.
  • Posted by mbohart2 on Jul 18th, 2008 at 5:57pm

    error code
    I get a P6 blinking error code.It won't let me run the program or anything.Got any help out there?
  • Posted by liam69 on Jul 16th, 2008 at 8:17pm

    no heat no manual
    heater not working
  • Posted by bryceboldt on Jul 15th, 2008 at 1:31am

    Error Code FL1
    Getting error code FL1 and do not have a manual what does it mean
  • Posted by purelight52 on Jul 14th, 2008 at 2:43pm

    GFCI
    When heater turned on, GFCI trips. Need element? Any suggestions?
  • Posted by cklint on Jul 14th, 2008 at 10:23am

    broken pipe
    I want to know how to repair a broken pipe.
  • Posted by msaz215 on Jul 13th, 2008 at 7:08pm

    tripping GFI breaker
    weslo daybreak 510
  • Posted by golfputo on Jul 13th, 2008 at 11:47am

    manual
    unknown

Home Efficiency Audit
The Home Depot's Home Efficiency Audit delves into all facets of energy and water usage throughout your home, helping you to discover the most efficient means to save money and energy. The audit will help you find ways to reduce your energy bills, protect the environment, and transform your house into a more comfortable, sustainable home.

Ask OwnerIQ Members for Help With A Problem

Let the OwnerIQ Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the OwnerIQ membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press