-
Posted by kkbtrott on Sep 8th, 2008 at 12:38am
Part number needed for replacement order
What's the part number for the spring in the string head under the advance button? I lost mine for the GT 201R trimmer and need the part number to order a new one.
-
Posted by thoaustin on Sep 7th, 2008 at 3:07pm
Engine Stater String Is Not Recoiled
The string is not recoiled. I disassembled the kit but cannot reassemble because of the string that is too hard to rewind. Anyway could I assemble the kit or I need to buy the new stater. Where could I buy it? Your help is greatly appreciated.
Thanks
-
Posted by gurcho on Sep 7th, 2008 at 11:43am
air filter
air filter replacement
-
Posted by altonjenkins on Sep 6th, 2008 at 11:18am
parts for weedeater
needa head for a push weedeater
-
Posted by jannut1 on Sep 5th, 2008 at 8:20pm
owners manual
how do I get a owners manual for this product?
Can it be emailed to me?
-
Posted by hershfeilder on Sep 3rd, 2008 at 4:51pm
remove the trimmer head
how do i do remove the trimmer head?
-
Posted by cddressel on Sep 3rd, 2008 at 4:39pm
How to string; how to lube
Need directions on how to: put new string on; how to lube head.
-
Posted by ejpo25 on Sep 2nd, 2008 at 3:57pm
Primer does not pop out
How does the primer work? Does it pressurize the fuel tank? It would appear the inlet hose is blocked? Could that be possible?
-
Posted by lashell_bell on Sep 1st, 2008 at 12:00pm
restring
don't have owner manual cant restring
-
Posted by jojosully32 on Aug 30th, 2008 at 10:41am
oil ratio
what is the proper oil ratio?
-
Posted by bagginfast on Aug 27th, 2008 at 3:58pm
ignition module
how close doe ignition module contact have to be to flywheel
-
Posted by bobsweeney31 on Aug 26th, 2008 at 3:06pm
lubrication
my bearing on the end of the drive shaft need to be lubricated how can I do it
-
Posted by elizabeth_vestal on Aug 26th, 2008 at 11:34am
Can't get it to start
Can't get it to start
-
Posted by smwilkins on Aug 26th, 2008 at 9:44am
Disolved Gas Lines from Gas tank
1 line broke in half & the other return line sheared off from the bottom of the Gas tank. Will buying both Line assembly & Return line fix my problem?...or should I replace all fuel lines?.........TIA
-
Posted by lizzyshuffle on Aug 26th, 2008 at 8:15am
Trimmer will not engage
This combination trimmer/blower attachment is almost new. It was purchased in June 2008. The blower attachment engages fine. When you switch to trimmer mode the trimmer head does not rotate.
-
Posted by samtaj on Aug 25th, 2008 at 10:19pm
Repair Manuel
The owners manual simply say to have a professional adjust the carb. There are 2 screws. I simply need the settings
-
Posted by clyles6987 on Aug 23rd, 2008 at 9:45am
trimmer line
having trouble with stringing the lie on the head. it seems one sice stops comming out when advancing the line
-
Posted by paullindakidwell on Aug 22nd, 2008 at 4:40pm
loading line cartrige
need to know how to load line cartrige
-
Posted by south_bnd on Aug 21st, 2008 at 7:09pm
line won't pay out
the line on my xt200 won't pay out any more when I hit the end on the ground. The line is fine on the spool but it won't work as it should.
-
Posted by xtremecrash540 on Aug 20th, 2008 at 9:26pm
repair manual
neeed repair or service manual
-
Posted by jackparrino on Aug 20th, 2008 at 3:10pm
manual
need manual
-
Posted by skmaesse on Aug 20th, 2008 at 10:02am
locate manual
would like a repair manual for this product
-
Posted by speebs41 on Aug 18th, 2008 at 10:11pm
need repair manual and parts list
gas line bad
-
Posted by drknowles2008 on Aug 18th, 2008 at 6:01pm
Running problems
I can get the unit to start with the choke on full, but it runs rough and not at all when the choke is moved off full.
-
Posted by sordinc on Aug 18th, 2008 at 5:00pm
Gettring Started
I am recently separated and I don't know how to start my gas powered grass trimmer. It has fuel in it, I just need to start it. How do I start it?
-
Posted by chinock4 on Aug 18th, 2008 at 7:04am
replace the trimmer cords
it ran out of the trimmer cords, and i don't know how to replace it
-
Posted by ninabgl on Aug 17th, 2008 at 12:59pm
not working
Was placed on recharger for 36 hours and does not work
-
Posted by bbrems on Aug 17th, 2008 at 12:46pm
manual pdf not opening
the pdf manual for this is not opening correctly
-
Posted by stephennic on Aug 17th, 2008 at 11:55am
oil level
tell me how much oil to put in brushcutter
-
Posted by peterosborne7142 on Aug 17th, 2008 at 10:14am
to remove @ replace trimmer head need a diagram to show
how to remove and replace 223r trimmer head
-
Posted by gs on Aug 16th, 2008 at 12:53pm
Line Replacement
Replace line in trimmer
-
Posted by heyjudenow on Aug 16th, 2008 at 8:10am
trimmer line
i need to know what size line to buy for the xt200. how do i replace it? i also do not have a manual.
-
Posted by gs31959 on Aug 16th, 2008 at 6:48am
I'm New To These - Help
Two things. Have to use choke lever as the throttle. Engine starts and runs fairly well on 3/4 choke but dies on less than 3/4 even when warmed up. And, how do I remove the head in order to replace the guard? Thanks to all for your patience.
-
Posted by sonny2323 on Aug 13th, 2008 at 9:10am
bump knob
cc 2025 I can't get the bump knob off to restring the trimmer
-
Posted by jnlinso on Aug 13th, 2008 at 12:05am
replacing trimmer head
How do you remove a trimmer head
-
Posted by bignotch on Aug 12th, 2008 at 2:54pm
Won't pump gas to combustion chamber
Repairing carburetor. Need technical support.
-
Posted by js_sylcox on Aug 12th, 2008 at 11:15am
gas mixture
we don't know the gas mixture,
-
Posted by niki0212 on Aug 11th, 2008 at 5:09pm
pull cord
pull cord won't rewind.
-
Posted by ltlelamb4jc on Aug 10th, 2008 at 8:41pm
how do I re -spool
132r grass trimmer. How do I re spool the trimmer and which direction does it go.
-
Posted by darsmail1 on Aug 10th, 2008 at 2:00pm
FUEL RUBBER PUMP
THE RUBBER THING YOU PUSH 10 TIMES IS CRACK AND THE FUEL IS NOW LEAKING WHAT IS THAT PART CALLED
-
Posted by sreid on Aug 9th, 2008 at 2:04pm
Looking for manual to change string
Looking for manual or instructions on changing string.
-
Posted by dndn7k on Aug 9th, 2008 at 1:50pm
Mnual
Manual parts list refers to fex shaft. I have a streight shaft and needs to lubrication.
-
Posted by shegholz on Aug 9th, 2008 at 10:56am
spool replacement
spool replacement instructions
-
Posted by Audie on Aug 8th, 2008 at 2:00pm
found it
Silly me. If I wuld hav checkd out the entire manual...I wouldn't hav askd a stupd question. thanks all
-
Posted by joshemgi on Aug 6th, 2008 at 6:04pm
Flapper Valve Keeps Sticking
I have had a repeating problem this summer with the "flapper valve" sticking in the engine of my SRM 2110 Grass Trimmer. As a result no gasoline flows into the clear bulb and the engine won't start. Suggestions welcome. I don't know where the flapper valve is or how to access it. The repair guy ke…
-
Posted by mlaclegg on Aug 4th, 2008 at 11:30am
OIL MIXTURES
GT200R What is the ratio oil:gas do you mix for this model trimmer
-
Posted by dean.lynden on Aug 3rd, 2008 at 5:11pm
Hard starting even when warm.
Once started it runs fine but if I shut it off, it's very difficult to get running again.
Also, how do I re-spool the double line?
-
Posted by ctx01799 on Aug 3rd, 2008 at 3:58pm
Oil Ratio
What is the Oil to Gas ratio when mixing the fuel? Believe it's 32:1.
-
Posted by fourcajuns on Aug 2nd, 2008 at 10:38am
how to load the trimmer with string
I have a Echo SRM210 straight shaft. I have lost instructions for loading the trimmer with string. Please advise.
-
Posted by r.s.morrison on Jul 27th, 2008 at 7:07pm
Head removal
How do you remove the string trimmer head?
-
Posted by adamwest77 on Jul 27th, 2008 at 3:33pm
Owner./ user manual for 52036
Just looking for an online manual or owners manual.
-
Posted by mikemoore_66 on Jul 27th, 2008 at 2:10pm
igh rpm bogging
stats fine, have to trigger constantly to get trimmer to run fast enough to engage trimmer head to cut grass. Any resistance on head results in the timmer blgging down and the head to stop soinning.
-
Posted by jakers0709 on Jul 27th, 2008 at 9:59am
how to mix gas
john deere weedeater
-
Posted by sluggermama2 on Jul 26th, 2008 at 5:41pm
restringing spool
I need to find out the correct way of restringing the spool
-
Posted by ghettoballer0202 on Jul 26th, 2008 at 4:53pm
repair
carburetor
-
Posted by wmducharme on Jul 26th, 2008 at 10:12am
putting string on reel
how to put the string on the reel
-
Posted by kkgaul on Jul 25th, 2008 at 8:40pm
parts manual
need parts manual
-
Posted by nailsrock on Jul 25th, 2008 at 4:51pm
carb adjustments
Weedeater won't rev at full speed
-
Posted by larryandlora on Jul 25th, 2008 at 1:00pm
replacement trimmer head
how do i lock the shaft to remove the head? i want to install a head with 3 swinging plastic blades.
-
Posted by danlock1010 on Jul 24th, 2008 at 7:06pm
Motor runs but the trimmer head doesn't. Perhaps clutch?
The trimmer motor will start and run without a problem but the trimmer head doesn't rotate. Is there perhaps a clutch problem is it something a person with average mechanical ability could fix?
-
Posted by jmpowerequip on Jul 24th, 2008 at 8:11am
fixing the throttle
i need a parts manual and schematic diagram to repair the throttle controls
-
Posted by grimalda on Jul 22nd, 2008 at 8:06pm
Trimmer Head
I need a Trimmer Head replacement.
Please give me the name of the store, in Cottonwood Arizona 86326, and part number of the units I could use.
-
Posted by debontheweb on Jul 21st, 2008 at 11:19pm
Fuel mixture settings
I need to know the fuel mixture setting and idle adjustment. Thank you.
-
Posted by fzmann63 on Jul 21st, 2008 at 9:46pm
replacing the pull string
how to replace the pull string
-
Posted by mark_s_mills on Jul 21st, 2008 at 5:26pm
LINE
PROBLEM WITH TRIMMER LINE
-
Posted by mark_s_mills on Jul 21st, 2008 at 5:25pm
REPLACING TRIMMER LINE
WHEN REPLACING LINE THE TRIMMER WILL WORK FOR A WHILE, THE LINE WILL SNAP BUT WILL NOT KEEP EXTENDING,THEREFOR A HAVE TO UNLOCK THE BOTTEM EVERYTIME TO EXTEND THE LINE PLEASE HELP
-
Posted by gmasat on Jul 21st, 2008 at 10:22am
belt repacement
placement around idler pulley
-
Posted by zepper7262 on Jul 20th, 2008 at 10:22am
How to string
How to string ?
-
Posted by sjbailey on Jul 19th, 2008 at 5:33pm
wont start
wont start
-
Posted by dearea on Jul 18th, 2008 at 5:06pm
Trimmer Line
How do you install a trimmer line
-
Posted by logandoug on Jul 18th, 2008 at 1:54pm
manual
need manual
-
Posted by hcloer2001 on Jul 18th, 2008 at 6:44am
manual
will not stay running
-
Posted by vincecarla on Jul 18th, 2008 at 1:12am
adapting a grass gator to my weedeater xt 400
I bought a grass gator 5610 replacement head for my gas powered curved shaft weedeater xt400 (these weedeater bump spools are driving me nuts)
The bolt on the end of my weedeaters curved shaft is about 1/2 inch too short to grab on to the grass gator head assembly securely.
Anybody know of a way t…
-
Posted by gail_sluzar2003 on Jul 17th, 2008 at 9:57am
settings
what are the settings for high low idles
-
Posted by dgcctx on Jul 16th, 2008 at 12:53am
fuel/oil mix
What is the proper gas/oil mix?
-
Posted by robertlp on Jul 14th, 2008 at 8:12pm
Tech Help
I have a model Husqvarna 232L trimmer purchased in 1999. The serial number is VHV031UB24EA. There is also a serial number on a small black plate - 8300005. The trimmer was built in 1998.
I finally needed a new trimmer head. I purchased the Husqvarna T35 Universal trimmer head (SKU # 537 38 81…
-
Posted by donalsmullen on Jul 14th, 2008 at 4:06pm
Pull Cord
Pull cord won't retract, having difficulty stripping to get to pulley. Can anyone explain how to do this
-
Posted by flyboard on Jul 12th, 2008 at 10:23pm
owners manual
need owners manual to replace pull rope
-
Posted by lew8211 on Jul 12th, 2008 at 7:15pm
removal of head trimmer
323L grass trimmer
-
Posted by vwhitehead on Jul 12th, 2008 at 2:22pm
threading trimmer
when I thread trimmer it does not give slack
-
Posted by jawilliamsjr on Jul 12th, 2008 at 10:23am
will not idle
will not idle
-
Posted by grumpfrog on Jul 10th, 2008 at 3:25pm
Grass Trimmer GT 2000
cannot get the manual. It say the page cannot be found
Please help
-
Posted by mtreptow on Jul 9th, 2008 at 5:59pm
User Manual
How to refill the trim line
-
Posted by mmcvie on Jul 9th, 2008 at 2:08am
grease nipple
where do i find the grease nipple
-
Posted by rjackson1967 on Jul 8th, 2008 at 6:31pm
restringin string head
how is head disassembled without damaging
-
Posted by gebianco on Jul 7th, 2008 at 9:16pm
manual
Hi I am looking for the manual for the te 475
weedeater. I am trying to change my fuel lines in.
-
Posted by gebianco on Jul 7th, 2008 at 9:16pm
manual
Hi I am looking for the manual for the te 475
weedeater. I am trying to change my fuel lines in.
-
Posted by alan on Jul 4th, 2008 at 10:47am
reloading line spool
how to open line spool
-
Posted by toad on Jul 2nd, 2008 at 6:53pm
how manual
need to know witch fuel line has the filter on it 24cc weed eater
-
Posted by grt1050 on Jul 2nd, 2008 at 4:32pm
Wheeled weed trimmer
not getting gas from primer pump, can see it leaking out of a small line
-
Posted by otisca148 on Jul 2nd, 2008 at 4:00pm
NEED MODEL NUMBER FOR GRASS TRIMMER
EZ4822BI
-
Posted by otisca148 on Jul 2nd, 2008 at 3:50pm
need model number for grass trimmer
ez4822bi
-
Posted by stabvett on Jun 28th, 2008 at 4:18pm
Upper drive
The upper shaft is spinning ; appears that upper socket is spinning over lower square shaft slower shaft-Store warrenty replaced upper end after one day now it's occuring again(two years later). Do I need to replace the intire upper Drive shaft Housing Assemply? What is the easy way to accomplish t…
-
Posted by robert.belsley on Jun 26th, 2008 at 11:33am
Maintenance Manual for Craftsman Weedwacker
I'm looking for the Maintenance manual for the trimmer
-
Posted by jimmy.finale on Jun 26th, 2008 at 10:56am
trimmer head
I hae to rplave the entire trimmer head, but I don't know the proper procedure for removing the old one. Anu suggestions will be helpful. Thanks!!
-
Posted by kennethholley on Jun 26th, 2008 at 10:54am
starter cup assembly
How to replace the starter cup assembly
-
Posted by lizardi123 on Jun 24th, 2008 at 4:18pm
I need part # 69700417
I need double spool cord attachment known as part # 69700417. I contacted The Power Center at 954-463-0772 and they could not refer me and did not have the part. I live in the 3315 area but can drive to whereever for this part at a decent price. What is the price and who is the distributor?
-
Posted by willie.fitzgerald on Jun 23rd, 2008 at 11:04am
replacement part: part # 6852-15
rear guard blade assy
-
Posted by spinningtop on Jun 22nd, 2008 at 9:04pm
how to roll new line
how do I roll the line on a Husqvarna 223l?
-
Posted by tergator002 on Jun 12th, 2008 at 5:56pm
weed trimmer
need a manual for repairs
Mobile Phones are Your Next Tour Guide
Keeping Hot Electronics Cool
Quick Steps to a Long-Lasting Paint Job: DIY Guide
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!